Airtac MICJ Adjustable Mini Cylinder MICJ40X60-50S
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X60-50S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 60mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X60-50S
Dial in the forward stop on-site without swapping hardware: the MICJ40X60-50S uses an external screw to trim the extend stroke by up to 50 mm, giving a usable forward range of 10-60 mm. This round-body stainless steel mini cylinder pairs that settable position with a variable air cushion at both ends, soaking up high-speed shock for smooth arrivals.
Because this SKU carries the -S suffix, a built-in piston magnet supports CMSG, DMSG and EMSG switches. The stainless barrel and rod resist mild washdown corrosion.
Airtac MICJ Adjustable Mini Cylinder MICJ40X60-50S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X60-50S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X60-50S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X60-50S Is Used
Pallet Press Head
Bring a sealing head down to a precise 10 mm gap for varying pallet heights; the adjustable forward stop prevents over-travel while the cushion softens the 32 kg pressing load.
Heavy Tote Pusher
Eject loaded totes from a roller conveyor using the full 60 mm extend, letting the end cushions absorb the shock of sudden stops at high speed without damaging the stainless rod.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X60-50S the Right Cylinder?
Choose this 60 mm stroke model when you need fast set-position moves and want to cut the impact without adding external shock absorbers. The needle cushions only decelerate near the end of travel—they do not lock the piston.
Mount using LB foot, FA flange or TC trunnion brackets (the SDB pivot block is not offered on this adjustable variant). The stop screw sets the extend end position but is not a mid-stroke lock; if the load must hold on air loss, install an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X60-50S FAQ
This Ø40 bore cylinder features a 1/4" port and an M12x1.25 male rod thread. It pushes 628.3 N and pulls 527.8 N at 0.5 MPa. At 0.7 MPa it pushes 879.6 N and pulls 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend end position by up to 50 mm on-site; retract remains the full stroke. Needle valves adjust the air cushion at both ends to decelerate the piston near stroke end. The -S suffix means a magnet is built in for CMSG, DMSG or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X60-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.