Airtac PBD Pen-shaped Double Rod Cylinder PBD10X25S
The AirTAC PBD Pen-shaped Double Rod Cylinder PBD10X25S is a double-acting pen-size mini cylinder with a piston rod protruding from both covers. The twin rods share one piston, giving equal push and pull force, resisting rotation and providing a spare mounting or sensing end on a Ø10mm bore, 25mm stroke.
- BoreØ10 mm
- Stroke25 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM8×1.0
- ForceEqual both ways
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBD Pen-shaped Double Rod Cylinder PBD10X25S
The AirTAC PBD10X25S is a double-acting, double-rod pen-size mini cylinder. A 4mm rod protrudes from both covers on one shared piston, yielding 33N of force in both directions at 0.5MPa. This symmetric output is ideal for pull-dominant or balanced duty cycles.
It features an M5x0.8 air port and a built-in piston magnet for electronic or reed switches. The slim SUS304 stainless body saves space, while a fixed TPU bumper cushions the ends.
Airtac PBD Pen-shaped Double Rod Cylinder PBD10X25S Technical Specifications
| Model | Airtac PBD Pen-shaped Double Rod Cylinder PBD10X25S |
|---|---|
| Series | PBD JIS pen-size double-rod cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm (both ends) |
| Stroke | 25 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Both chambers act on the rod-side annular area, so push and pull forces are equal. Piston rod and barrel are stainless steel. Confirm against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 33.0 N | 33.0 N |
| 0.7 MPa (max) | 46.2 N | 46.2 N |
Because a rod occupies both chambers, the effective area is identical on each side — push and pull forces match. Values are from the AirTAC thrust table (rod-side / pull column). Size with a friction margin.
Model Code: Airtac PBD Pen-shaped Double Rod Cylinder PBD10X25S
| PBD | JIS pen-size double-rod mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (single rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PBD Pen-shaped Double Rod Cylinder PBD10X25S Is Used
Dual-Side Transfer
Pushes a part on the forward stroke and retracts a second tool on the pull, using the spare rod end for synchronized handling without extra hardware.
Sensor-Flagged Index
Mounts a detection flag on the unused rod tip while the primary end drives the load, keeping the sensor clear of the main workspace.
Symmetric Clamp
Applies equal 33N clamping pressure in both directions, ensuring balanced holding force for delicate electronic component fixtures.
Is the Airtac PBD Pen-shaped Double Rod Cylinder PBD10X25S the Right Cylinder?
This 10mm bore generates 33N both ways at 0.5MPa. Stepping down to the 6mm bore drops force to 10.6N, while the 12mm bore raises it to 46.7N. Choose this 25mm stroke if your jig needs compact symmetric thrust, and remember both ends require rod clearance across the full travel.
Confirm your ordering essentials: 10mm bore, 25mm stroke, S magnet, and mounting. The 4mm rod suits coaxial thrust; add a linear guide for off-axis loads.
Quick checklist
- ✓ Need equal force in both directions
- ✓ Second rod end for a sensor / stop / flag
- ✓ Better anti-rotation than a single rod
- ✓ Magnet (S) for sensors?
- ✓ Clearance for the rod on both ends
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Leave clearance for the rod at both ends.
- check Keep the load coaxial; avoid side load on the thin rods.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
Airtac PBD Pen-shaped Double Rod Cylinder PBD10X25S FAQ
It provides equal push and pull forces of 33N at 0.5MPa and 46.2N at 0.7MPa. The maximum operating pressure is 0.7MPa.
Twin rods on one piston resist rotation better than a single rod, improving guidance. The second rod end can also carry a sensor flag or external stop.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBD Pen-Size Cylinders
Request a Quote for Airtac PBD Pen-shaped Double Rod Cylinder PBD10X25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.