Airtac SAI100 Standard Air Cylinder SAI100BX850
The AirTAC Airtac SAI100 Standard Air Cylinder SAI100BX850 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 850mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke850 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAI100 Standard Air Cylinder SAI100BX850
The AirTAC SAI100X850 is a double-acting ISO 15552 profile cylinder engineered for heavy-duty automation. It delivers a robust push force of 3927 N at 0.5 MPa, extending an 850 mm stroke to drive substantial loads across long distances. The extruded aluminum barrel design omits tie rods, providing a clean exterior that is dimensionally interchangeable with other ISO 15552 cylinders.
This specific configuration incorporates a SUS304 stainless steel rod for superior corrosion resistance in harsh environments. It uses PT tapered port threads and lacks a piston magnet, meaning it is built purely for pneumatic actuation without external position sensing. Adjustable air cushions at both ends absorb kinetic energy at stroke extremes, protecting the mechanism from impact.
Airtac SAI100 Standard Air Cylinder SAI100BX850 Technical Specifications
| Model | Airtac SAI100 Standard Air Cylinder SAI100BX850 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI100 Standard Air Cylinder SAI100BX850
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI100 Standard Air Cylinder SAI100BX850 Is Used
Pallet Transfer
Drives large pallet handling systems over 850mm strokes, utilizing the 3927N push force to move heavy goods smoothly along material flow lines.
Press Ejection
Ejects formed metal or plastic parts from heavy machinery, where the SUS304 rod withstands potential coolant splashes and harsh factory conditions.
Automated Storage
Actuates large lifting or pushing arms in automated storage and retrieval systems, relying on adjustable cushions to stop 850mm movements safely.
Is the Airtac SAI100 Standard Air Cylinder SAI100BX850 the Right Cylinder?
Selecting this 100 mm bore over the smaller 80 mm variant upgrades your push force from 2513 N to 3927 N at 0.5 MPa, while stepping up to a 125 mm bore would yield 6136 N. The 850 mm stroke requires careful attention to mechanics; long unsupported rods are prone to bending under side loads. To prevent premature wear on the rod bearing and seals, implement an external guide rail or use a guided cylinder design for heavy off-center loads.
As a drop-in replacement per ISO 15552 mounting dimensions, it matches standard FA, FB, and TC accessory footprints. If your application requires intermediate stopping or fail-safe load holding without constant air pressure, note that the standard SAI cylinder will drift; you should specify the SAIL (air-released lock) or BSAI (bidirectional clamp-lock) variant instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI100 Standard Air Cylinder SAI100BX850 FAQ
At a 0.5 MPa operating pressure, the SAI100X850 generates a push force of 3927 N and a pull force of 3681 N. At 0.7 MPa, the push force increases to 5497 N.
Yes, the SAI100X850 is a true ISO 15552 profile cylinder. Its standardized mounting interface and PT G1/2 port make it dimensionally interchangeable with other ISO 15552 cylinders of the same bore size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI100 Standard Air Cylinder SAI100BX850
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.