Airtac SAI100 Standard Air Cylinder SAI100X10
The AirTAC Airtac SAI100 Standard Air Cylinder SAI100X10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 10mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke10 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAI100 Standard Air Cylinder SAI100X10
The AirTAC SAI100X10 is a double-acting ISO 15552 profile cylinder engineered for high-force, short-stroke execution. It yields a push force of 3927 N at 0.5 MPa, making it highly effective for rapid pressing and clamping tasks. The extruded aluminum barrel omits tie rods, presenting a clean exterior that drops directly into standard ISO 15552 mounting interfaces.
This specific configuration features a carbon steel piston rod and PT tapered port threads. Because a magnet for sensors is not specified, position detection requires external hardware. For operations demanding integrated pneumatic control within the same footprint, the related SAIF variant incorporates a built-in 4M solenoid valve across bores 32 to 100.
Airtac SAI100 Standard Air Cylinder SAI100X10 Technical Specifications
| Model | Airtac SAI100 Standard Air Cylinder SAI100X10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI100 Standard Air Cylinder SAI100X10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI100 Standard Air Cylinder SAI100X10 Is Used
High-Force Stamping
Executes short, powerful stamping and marking operations on production lines using its 3927 N push force at 0.5 MPa.
Heavy Product Diverter
Briefly extends 10mm to push heavy pallets or components off a main conveyor track with abrupt, decisive energy.
Industrial Clamping Jigs
Secures thick steel plates or heavy castings during machining by applying immediate, high-tonnage clamping pressure.
Is the Airtac SAI100 Standard Air Cylinder SAI100X10 the Right Cylinder?
Choose this 100mm bore when a system requires substantially more thrust than the 80mm neighbor, which provides 2513 N at 0.5 MPa. The 10mm stroke is optimal for brief, high-impact movements where maintaining a compact retracted length is critical. Because the stroke is minimal, rod-bearing bending and side-load deflection are negligible concerns compared to longer units.
As a standard double-acting cylinder, this model relies on live air pressure to move in both directions. It cannot hold a load in place if air pressure is lost or the control valve is centered; operators needing fail-safe holding should evaluate the SAIL (air-released lock) or BSAI (bidirectional clamp-lock) alternatives. Replacement matching requires a 100mm bore, 10mm stroke, G1/2 port, and appropriate ISO 15552 mounting accessories like FA or FB flanges.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI100 Standard Air Cylinder SAI100X10 FAQ
At an operating pressure of 0.5 MPa, the push force is 3927 N, and the pull force is 3681 N. If pressure is increased to 0.7 MPa, the push force reaches 5497 N.
Yes, the SAI100X10 is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounts designed for other ISO 15552 profile cylinders, provided the 100mm bore, 10mm stroke, and G1/2 port match your infrastructure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI100 Standard Air Cylinder SAI100X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.