Airtac SAI100 Standard Air Cylinder SAI100X200S
The AirTAC Airtac SAI100 Standard Air Cylinder SAI100X200S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke200 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAI100 Standard Air Cylinder SAI100X200S
The AirTAC SAI100X200-S is a double-acting ISO 15552 profile cylinder featuring a 100mm bore and 200mm stroke. It delivers a robust 3927 N of push force and 3681 N of pull force at 0.5 MPa, making it well-suited for heavy-duty positioning tasks. The extruded aluminum barrel design omits tie rods while maintaining strict standardized mounting dimensions.
This specific configuration includes a standard carbon steel piston rod and a built-in magnet for use with CMSE and DMSE series sensor switches. The dual cushioning system at both ends is adjustable, allowing you to fine-tune the deceleration of large moving masses across the 30-800 mm/s speed range.
Airtac SAI100 Standard Air Cylinder SAI100X200S Technical Specifications
| Model | Airtac SAI100 Standard Air Cylinder SAI100X200S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI100 Standard Air Cylinder SAI100X200S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI100 Standard Air Cylinder SAI100X200S Is Used
Heavy Stamping
Provides the necessary 3927 N of thrust at 0.5 MPa for pressing bearings and bushings into heavy housings.
Pallet Diverters
Drives robust mechanical stops and diverters on high-mass material handling conveyor lines.
Automated Welding
Moves heavy welding fixtures into position, utilizing the adjustable cushions to prevent end-cap impact.
Is the Airtac SAI100 Standard Air Cylinder SAI100X200S the Right Cylinder?
Selecting this 100mm bore is ideal when a 80mm cylinder (providing 2513 N push at 0.5 MPa) is insufficient for your load, but a 125mm bore would be excessive. The 200mm stroke provides ample travel for mid-range automation cycles. Because this is a 200mm stroke, side-load risks are moderate, but you should still ensure rigid mounting using FA or FB flanges to protect the rod bearing.
If your machinery loses air pressure, this standard cylinder will not hold its load in place. For vertical applications requiring fail-safe position holding, consider the SAIL variant with an air-released lock, or integrate an external pilot-operated check valve. This model is dimensionally interchangeable with other ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI100 Standard Air Cylinder SAI100X200S FAQ
At 0.5 MPa, this 100mm bore cylinder generates 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N.
Yes, the SAI100X200-S adheres to the ISO 15552 mounting interface, meaning it serves as a drop-in replacement for other standard ISO 15552 profile cylinders with matching 100mm bore and 200mm stroke dimensions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI100 Standard Air Cylinder SAI100X200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.