Airtac SAI100 Standard Air Cylinder SAI100X50
The AirTAC Airtac SAI100 Standard Air Cylinder SAI100X50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 50mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke50 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI100 Standard Air Cylinder SAI100X50
The AirTAC SAI100X50 is a double-acting ISO 15552 profile cylinder featuring a 100mm bore and 50mm stroke. It delivers a push force of 3927 N at 0.5 MPa and 5497 N at 0.7 MPa, making it a robust choice for heavy-duty positioning. The extruded aluminum barrel design omits tie rods, providing a clean exterior that simplifies mounting and sensor placement.
This unit comes standard with a carbon steel piston rod and utilizes PT tapered G1/2 ports. Because no magnet is specified (-S omitted), it is configured for standard actuation without Hall-effect sensing. For high-temperature environments up to 70 C, the standard TPU seals can be swapped for Viton (H) variants.
Airtac SAI100 Standard Air Cylinder SAI100X50 Technical Specifications
| Model | Airtac SAI100 Standard Air Cylinder SAI100X50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI100 Standard Air Cylinder SAI100X50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI100 Standard Air Cylinder SAI100X50 Is Used
Automotive Stamping
Provides the 3927 N push force required to form and hold heavy metal panels during stamping operations.
Pallet Diverters
Actuates heavy-duty routing gates on high-mass conveyor lines where 50mm stroke is sufficient for lane changing.
Press Ejection
Drives solid ejection pins to clear finished parts from machining centers under 0.7 MPa working pressure.
Is the Airtac SAI100 Standard Air Cylinder SAI100X50 the Right Cylinder?
If you need less force, the 80mm bore offers 2513 N at 0.5 MPa, but the 100mm bore is ideal when you need 3927 N of push thrust in a compact footprint. Because the stroke is 50mm, side-load stress on the rod bearing is minimal, though external guides are always recommended for offset loads.
This SAI100X50 is dimensionally interchangeable per ISO 15552, meaning it serves as a drop-in replacement for other ISO 15552 profile cylinders. Match your mounting accessory (LB, FA, or TC) and ensure your air supply is filtered to 40 um. Note that the standard adjustable air cushions only decelerate the piston at end-of-stroke; they do not hold a load. If your application requires position holding without live air pressure, use the SAIL (lock) or BSAI (clamp-lock) variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI100 Standard Air Cylinder SAI100X50 FAQ
At 0.5 MPa it provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N.
Yes, the SAI100X50 is a profile cylinder dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other standard profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI100 Standard Air Cylinder SAI100X50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.