Airtac SAI100 Standard Air Cylinder SAI100X650S
The AirTAC Airtac SAI100 Standard Air Cylinder SAI100X650S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 650mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke650 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI100 Standard Air Cylinder SAI100X650S
The AirTAC SAI100X650-S is a double-acting ISO 15552 profile cylinder featuring a 100mm bore and 650mm stroke. It delivers a robust 3927 N of push force and 3681 N of pull force at 0.5 MPa, making it well-suited for heavy material handling over extended distances. The extruded aluminum barrel design omits tie rods, providing a clean exterior that is dimensionally interchangeable with other ISO 15552 cylinders.
Equipped with a magnet for position sensing, this unit works seamlessly with CMSE and DMSE series reed switches mounted in the dual sensor grooves. The standard carbon steel piston rod offers reliable durability for industrial automation, while the adjustable air cushions at both ends ensure smooth deceleration of heavy loads at stroke completion.
Airtac SAI100 Standard Air Cylinder SAI100X650S Technical Specifications
| Model | Airtac SAI100 Standard Air Cylinder SAI100X650S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI100 Standard Air Cylinder SAI100X650S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI100 Standard Air Cylinder SAI100X650S Is Used
Pallet Transfer Lines
Pushes heavy pallets along extended conveyor sections using the full 650mm stroke and 3927 N of thrust at 0.5 MPa.
Automated Press Feed
Advances heavy material blanks into forming machinery, utilizing the magnet and CMSE sensors to confirm feed completion.
Large Crate Pusher
Diverts large shipping crates at sorting stations, relying on the robust carbon steel rod to handle high inertial loads.
Is the Airtac SAI100 Standard Air Cylinder SAI100X650S the Right Cylinder?
When sizing this 100mm bore actuator, compare its 3927 N output at 0.5 MPa against the 80mm bore, which provides 2513 N. If your application requires less force, stepping down saves compressed air; if you need to move heavier fixtures, the 125mm bore yields 6136 N. Because this model features a 650mm stroke, the extended rod is susceptible to bending under side loads. For optimal longevity, pair this cylinder with an external linear guide or use a fully guided cylinder to prevent rod-bearing wear.
As a true ISO 15552 profile cylinder, this unit serves as a drop-in replacement matching the 100mm bore, 650mm stroke, PT G1/2 port, and standard mounting accessories. Remember that the adjustable end-cushions only decelerate the piston; they do not hold a load. If your machinery must maintain position during a pressure loss, integrate an external pilot-operated check valve or select the SAIL locking variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI100 Standard Air Cylinder SAI100X650S FAQ
At 0.5 MPa operating pressure, this 100mm bore cylinder provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N.
Yes, the SAI100X650-S is a genuine ISO 15552 profile cylinder. It is dimensionally interchangeable with other ISO 15552 cylinders matching the 100mm bore, 650mm stroke, and G1/2 port specifications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI100 Standard Air Cylinder SAI100X650S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.