Airtac SAI160 Standard Cylinder SAI160AX190S
The AirTAC SAI160 Standard Cylinder SAI160AX190S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 190mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke190 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI160 Standard Cylinder SAI160AX190S
The AirTAC SAI160X190-S is a double-acting ISO 15552 profile cylinder built for heavy-duty automation. It generates 14074N of push force at 0.7 MPa, making this 190mm stroke ideal for high-impact pressing and heavy material handling. The extruded aluminum barrel omits tie rods for a cleaner exterior while maintaining strict ISO mounting dimensions.
This specific configuration features a SUS420J2 stainless steel rod (option A) for superior corrosion resistance in humid or washdown environments. Equipped with a magnet (-S), the barrel includes sensor grooves on both sides for seamless CMSE or DMSE switch integration. PT tapered ports ensure a robust pneumatic seal, and adjustable air cushions at both ends absorb shock at the stroke extremes.
Airtac SAI160 Standard Cylinder SAI160AX190S Technical Specifications
| Model | Airtac SAI160 Standard Cylinder SAI160AX190S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI160 Standard Cylinder SAI160AX190S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI160 Standard Cylinder SAI160AX190S Is Used
Heavy-Duty Stamping
Provides the 14074N push force at 0.7 MPa required for forming, riveting, and stamping thick metal components in automated fabrication lines.
Large Part Ejection
Uses the 190mm stroke to positively eject heavy molded or machined parts from press beds, utilizing the SUS420J2 rod to resist corrosion from cutting fluids.
Pallet Handling
Drives robust lifting and positioning mechanisms for heavy pallets, relying on adjustable air cushions to decelerate the massive 160mm piston smoothly.
Is the Airtac SAI160 Standard Cylinder SAI160AX190S the Right Cylinder?
This 160mm bore provides 10053N of push force at 0.5 MPa; step down to the 125mm bore if your application only requires 6136N at that same pressure to save space and air volume. Because the stroke is under 300mm, side-load stress on the rod bearing is minimal, though external guides are still recommended for offset loads. If the machine loses air pressure, the piston cannot hold its position and will drift; for dead-drop prevention, specify the SAIL variant with an air-released lock or use an external rod lock. This actuator is dimensionally interchangeable with other ISO 15552 profile cylinders, allowing direct replacement using standard FA flange or TC trunnion mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI160 Standard Cylinder SAI160AX190S FAQ
At 0.7 MPa operating pressure, the 160mm bore generates a push force of 14074N and a pull force of 9425N. The maximum theoretical force at 1.0 MPa is 2050 kgf.
Yes, the -S suffix indicates this model includes a magnet. The extruded aluminum barrel features sensor grooves on both sides, allowing direct mounting of CMSE or DMSE series reed switches for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI160 Standard Cylinder SAI160AX190S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.