Airtac SAI160 Standard Cylinder SAI160AX750
The AirTAC SAI160 Standard Cylinder SAI160AX750 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 750mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke750 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI160 Standard Cylinder SAI160AX750
The AirTAC SAI160X750 is a double-acting ISO 15552 profile cylinder engineered for heavy-duty automation. Delivering a substantial push force of 14074 N at 0.7 MPa, this 160 mm bore unit is built to execute demanding linear motion tasks across a 750 mm stroke. The extruded aluminum barrel design omits tie rods, providing a rigid yet streamlined structure that integrates seamlessly into ISO 15552 mounting systems.
This specific configuration features a SUS420J2 stainless steel piston rod (material code A) for enhanced corrosion resistance in humid industrial environments. It utilizes PT tapered port threads and includes adjustable air cushions at both ends to absorb kinetic energy. Note that for applications requiring intermediate position holding without continuous air pressure, the SAIL locking variant or an external rod lock is necessary, as standard cushions only decelerate at stroke ends.
Airtac SAI160 Standard Cylinder SAI160AX750 Technical Specifications
| Model | Airtac SAI160 Standard Cylinder SAI160AX750 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI160 Standard Cylinder SAI160AX750
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI160 Standard Cylinder SAI160AX750 Is Used
Heavy Stamping Press
Provides the robust 14074 N push force required to actuate large metal stamping and forming presses over a 750 mm travel distance.
Pallet Transfer
Indexes heavy loaded pallets along roller conveyors in materials handling lines, utilizing adjustable cushions to stop 750 mm strokes smoothly.
Large Door Actuation
Opens and closes substantial industrial access doors or machine guards where a 160 mm bore is necessary to overcome high friction and mass.
Is the Airtac SAI160 Standard Cylinder SAI160AX750 the Right Cylinder?
Selecting the SAI160X750 is appropriate when your application requires moving heavy loads over a 750 mm distance, requiring the 10053 N push force generated at just 0.5 MPa. If the project demands even higher thrust capacity, stepping up to the 200 mm bore yields 15708 N at 0.5 MPa. Because this stroke is 750 mm, the extended unsupported rod is highly susceptible to bending under side loads; utilizing an external guide rail or a fully guided cylinder is strongly recommended to prevent premature rod-bearing wear.
As a genuine AirTAC component, this model serves as a direct replacement for other ISO 15552 profile cylinders, matching standard mounting dimensions exactly. To complete your assembly, pair it with a TC trunnion or LB foot bracket, and note that this unit lacks a magnet (-S not specified), so external reed switches like CMSE cannot be used for position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI160 Standard Cylinder SAI160AX750 FAQ
At 0.7 MPa operating pressure, this 160 mm bore cylinder generates a push force of 14074 N and a pull force of 9425 N. At 0.5 MPa, it provides 10053 N of push force.
Yes, the SAI160X750 is dimensionally interchangeable with other ISO 15552 profile cylinders. You can drop it into existing mounting footprints using standard FA flanges or TC trunnions without modifying the machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI160 Standard Cylinder SAI160AX750
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.