Airtac SAI160 Standard Cylinder SAI160AX95
The AirTAC SAI160 Standard Cylinder SAI160AX95 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 95mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke95 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI160 Standard Cylinder SAI160AX95
The AirTAC SAI160X95 is a double-acting ISO 15552 profile cylinder engineered for heavy-duty automation. Delivering a substantial 14074 N of push force at 0.7 MPa, this 160 mm bore actuator handles high-impact tasks effortlessly. The 95 mm stroke provides precise short-travel movement for heavy payloads. An extruded aluminum barrel eliminates tie-rods, ensuring a rigid yet lightweight structure.
This specific configuration features a SUS420J2 stainless steel piston rod (material code A) for superior corrosion and scratch resistance compared to standard carbon steel. Fluid ports utilize PT tapered threads, ensuring tight, leak-free pneumatic connections. For applications requiring multi-directional stopping power, the related SAID double-rod variant offers identical ISO 15552 mounting dimensions with output on both ends.
Airtac SAI160 Standard Cylinder SAI160AX95 Technical Specifications
| Model | Airtac SAI160 Standard Cylinder SAI160AX95 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI160 Standard Cylinder SAI160AX95
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI160 Standard Cylinder SAI160AX95 Is Used
Heavy Metal Stamping
Provides the robust 14074 N push force required to drive large metal stamping presses and forming dies through thick plate materials.
Automotive Assembly Jigs
Actuates heavy chassis positioning jigs, utilizing the SUS420J2 rod to resist wear in harsh, debris-heavy manufacturing environments.
Pallet Diverters
Handles heavy industrial pallets on high-throughput lines, using the 95 mm stroke to rapidly push and redirect massive loads.
Is the Airtac SAI160 Standard Cylinder SAI160AX95 the Right Cylinder?
Select this 160 mm bore when 100 mm bores (providing 5497 N at 0.5 MPa) lack the necessary thrust for your heavy loads. Conversely, if 14074 N at 0.7 MPa is excessive, stepping down to a 125 mm bore yields 8590 N. Because this is a standard 95 mm stroke, side-load stress on the rod bearing is minimal, but always ensure proper alignment to prevent premature seal wear.
The SAI160X95 is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 profile cylinders. Match your existing setup by specifying the PT port thread, appropriate mounting accessory (like TC trunnion or FA flange), and confirming if a magnet (-S) is needed for CMSE/DMSE sensor switches. Note that this standard cylinder relies on adjustable air cushions for end-of-stroke deceleration; it does not hold loads pneumatically. If your system requires position holding without air pressure, integrate the SAIL lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI160 Standard Cylinder SAI160AX95 FAQ
At an operating pressure of 0.7 MPa, the SAI160X95 generates a push force of 14074 N and a pull force of 9425 N. The theoretical maximum force at 1.0 MPa is 2050 kgf.
Yes. The SAI160X95 is a genuine ISO 15552 profile cylinder, making its mounting interface dimensionally interchangeable with other ISO 15552 cylinders from brands like Festo or SMC. Always verify your port size (PT G3/4) and stroke requirements before installation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI160 Standard Cylinder SAI160AX95
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.