Airtac SAI32 Standard Cylinder SAI32AX200S
The AirTAC SAI32 Standard Cylinder SAI32AX200S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32AX200S
The AirTAC SAI32X200-S is a double-acting ISO 15552 profile cylinder engineered for direct compatibility with standardized mounting interfaces. Delivering a push force of 402 N at 0.5 MPa, this 32 mm bore unit paired with a 200 mm stroke excels in compact automation requiring precise linear movement.
This variant features a SUS420J2 stainless steel rod for enhanced corrosion resistance and includes an integrated magnet for direct mounting of CMSE or DMSE position switches along the dual sensor grooves. Fluid ports feature a PT tapered thread type, ensuring robust pneumatic sealing for reliable operation at speeds between 30 and 800 mm/s.
Airtac SAI32 Standard Cylinder SAI32AX200S Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32AX200S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32AX200S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32AX200S Is Used
Small Part Ejection
Provides the precise 402 N force needed to push lightweight plastic or metal components out of machining centers at high cycle rates.
Package Diverting
Actuates routing gates on 200 mm strokes to sort small parcels on packaging lines without occupying excessive footprint.
Clamp Actuation
Drives secondary clamping mechanisms in assembly fixtures where the SUS420J2 rod resists minor environmental moisture.
Is the Airtac SAI32 Standard Cylinder SAI32AX200S the Right Cylinder?
Select this 32 mm bore when an application requires roughly 400 N of push force at 0.5 MPa. If your assembly needs less thrust, stepping down is not an option within the SAI standard range, but moving up to a 40 mm bore provides 628 N if higher payload capacity is required. The 200 mm stroke is well within the 1000 mm maximum standard limit for this bore.
Because this model features a 200 mm stroke, side-load stress on the rod bearing is moderate but manageable. For applications involving heavy off-center loads, pair this cylinder with an external guide rail to prevent premature seal wear. Note that the standard adjustable air cushions decelerate the piston at stroke ends but do not lock the rod; if the system loses air pressure, the load will drift. For position holding without live pressure, consider the SAIL variant with an air-released lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32AX200S FAQ
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides a push force of 402 N and a pull force of 345 N. If operated at 0.7 MPa, the push force increases to 563 N.
Yes, the SAI32X200-S is dimensionally interchangeable per ISO 15552. You can swap it into existing foot, flange, or trunnion mounts designed for other ISO 15552 profile cylinders of the same bore and stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32AX200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.