Airtac SAI32 Standard Cylinder SAI32AX325
The AirTAC SAI32 Standard Cylinder SAI32AX325 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 325mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke325 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32AX325
The AirTAC SAI32X325 is a double-acting ISO 15552 profile cylinder engineered to deliver 402 N of push force at 0.5 MPa. Its 325 mm stroke makes it well-suited for intermediate linear positioning tasks that require extended travel without occupying the full footprint of larger bores.
This specific configuration features a SUS420J2 stainless steel piston rod for enhanced corrosion resistance and utilizes PT tapered port threading. Because this variant is built without a magnet, it does not directly support CMSE or DMSE sensor switches.
Airtac SAI32 Standard Cylinder SAI32AX325 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32AX325 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32AX325
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32AX325 Is Used
Material Diverting
Pushes lightweight packages or cardboard diverts on a sorting line over a 325 mm travel distance.
Component Ejection
Ejects small molded or machined parts from a fixture with 402 N of push force at 0.5 MPa.
Pallet Stops
Acts as a lightweight pneumatic stop mechanism for low-mass pallets in a handling system.
Is the Airtac SAI32 Standard Cylinder SAI32AX325 the Right Cylinder?
If your application requires less force, stepping down is not an option since 32 mm is the smallest standard SAI bore. Conversely, stepping up to a 40 mm bore provides 628 N of push force at 0.5 MPa if your payload demands more thrust. Since this 325 mm stroke creates a long unsupported rod, you must manage side-load carefully to avoid bending the rod bearing; utilizing an external guide rail or a fully guided cylinder is strongly recommended.
For an exact ISO 15552 direct replacement, match the 32 mm bore, 325 mm stroke, G1/8 port, and appropriate mounting accessories like FA flanges or LB foot brackets. Remember that a standard SAI cylinder will drift and drop its load if air pressure is lost; utilize an external pilot-operated check valve or the SAIL lock variant if position holding is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32AX325 FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N.
Yes, the SAI32X325 is a genuine ISO 15552 profile cylinder, making its mounting interface and center distances dimensionally interchangeable with other ISO 15552 profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32AX325
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.