Airtac SAI32 Standard Cylinder SAI32AX80S
The AirTAC SAI32 Standard Cylinder SAI32AX80S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke80 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32AX80S
The AirTAC SAI32X80-S is a double-acting ISO 15552 profile cylinder engineered for compact automation. Delivering 402 N of push force at 0.5 MPa, this 32 mm bore unit is tailored for short 80 mm stroke movements. The extruded aluminum barrel eliminates tie-rods, providing a clean exterior that drops directly into standardized ISO 15552 mounting footprints.
Equipped with a magnetic piston (-S), this model seamlessly integrates with CMSE and DMSE sensor switches fitted into the dual side grooves. For corrosive resilience, the rod is constructed from SUS420J2 stainless steel (material code A), and fluid connections utilize PT tapered threads.
Airtac SAI32 Standard Cylinder SAI32AX80S Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32AX80S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32AX80S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32AX80S Is Used
Small Part Ejection
Provides reliable 402 N push force to eject small molded components from machining centers.
Package Diverting
Actuates lightweight routing gates on 80 mm strokes to redirect small parcels on assembly lines.
Clamp Actuation
Drives short-stroke clamping mechanisms where a magnetic piston confirms position via DMSE sensors.
Is the Airtac SAI32 Standard Cylinder SAI32AX80S the Right Cylinder?
Select this 80 mm stroke variant when an application requires precise point-to-point movement without the bulk of longer strokes. If your assembly requires less than 402 N of push force at 0.5 MPa, stepping down is viable, but the 32 mm bore offers an optimal balance of speed and footprint for general automation. The 80 mm stroke keeps the rod fully supported, minimizing side-load concerns.
Because it is a double-acting cylinder, the SAI32X80-S relies on continuous air pressure to maintain its rod position. If pressure is removed, the load will drift; for applications requiring dead-stop holding without live air, consider the SAIL locking variant or an external pilot check valve. This model is dimensionally interchangeable with other ISO 15552 cylinders, featuring a PT G1/8 port and compatibility with FA, FB, LB, and TC mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32AX80S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N.
Yes, the SAI32X80-S is dimensionally interchangeable per ISO 15552. You can drop it into existing footprints using standard FA, LB, or TC mounts, provided the 80 mm stroke and G1/8 port match your setup.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32AX80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.