Airtac SAI32 Standard Cylinder SAI32AX950
The AirTAC SAI32 Standard Cylinder SAI32AX950 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 950mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke950 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32AX950
The AirTAC SAI32X950 is a double-acting ISO 15552 profile cylinder featuring a 32mm bore and a 950mm stroke. It delivers a push force of 563N at 0.7 MPa, making it suitable for extended reach linear motion tasks. This specific configuration utilizes a SUS420J2 stainless steel piston rod (material code A) for enhanced corrosion resistance.
This model is equipped with PT tapered port threads and lacks a standard magnet. As an extruded aluminum profile barrel design without tie-rods, it integrates seamlessly into standardized ISO 15552 mounting setups.
Airtac SAI32 Standard Cylinder SAI32AX950 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32AX950 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32AX950
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32AX950 Is Used
Long-Reach Diversion
Pushes packages across a wide conveyor belt using its 950mm extension, relying on the 402N push force at 0.5 MPa for light materials.
High-Bay Extraction
Extracts totes from deep shelving units where a long stroke is necessary, benefiting from the SUS420J2 rod's resistance to environmental moisture.
Film Roll Handling
Acts as an extended reach actuator to position packaging film rolls, requiring external guides to prevent rod deflection over the 950mm travel.
Is the Airtac SAI32 Standard Cylinder SAI32AX950 the Right Cylinder?
A 950mm stroke on a 32mm bore places significant leverage on the rod bearing, meaning side loads can cause premature wear or bending. For an application of this length, employing an external guide rail or a fully guided cylinder is strongly recommended to support the load. If your application requires holding a load during a loss of air pressure, note that the standard adjustable air cushions only decelerate the piston at stroke ends and do not function as a brake; consider the SAIL variant for pneumatic locking.
When specifying a replacement, verify the 32mm bore, 950mm stroke, PT G1/8 port, and the required mounting accessory (such as an LB foot or FA flange). Since this unit lacks the -S suffix, it cannot host CMSE or DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32AX950 FAQ
At 0.7 MPa operating pressure, this 32mm bore cylinder provides a push force of 563N and a pull force of 345N. The theoretical maximum force at 1.0 MPa is 82 kgf.
Yes, the SAI32X950 is dimensionally interchangeable per ISO 15552. You can replace other ISO 15552 profile cylinders of the same bore and stroke by matching the PT G1/8 ports and your existing mounting accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32AX950
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.