Airtac SAI32 Standard Cylinder SAI32BX750S
The AirTAC SAI32 Standard Cylinder SAI32BX750S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 750mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke750 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32BX750S
The AirTAC SAI32X750-S is a double-acting ISO 15552 profile cylinder engineered for precise linear motion over extended distances. Operating at 0.5 MPa, it generates 402 N of push force and 345 N of pull force, making it well-suited for lighter load positioning tasks. The 750 mm stroke provides ample travel for automated routing or transfer systems.
This variant features a SUS304 stainless steel piston rod (code B) for superior corrosion resistance in humid or washdown environments. Equipped with a magnet (-S), it seamlessly integrates with CMSE and DMSE sensor switches housed in the dual-side grooves of the extruded aluminum barrel. Fluid ports feature PT tapered threads.
Airtac SAI32 Standard Cylinder SAI32BX750S Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32BX750S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32BX750S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32BX750S Is Used
Long-Stroke Transfer
Pushes lightweight product carriers 750 mm down an assembly line conveyor using 402 N of thrust.
Vertical Elevator
Raises packaging materials to overhead platforms where the SUS304 rod resists environmental moisture.
Sensor Sorting
Actuates a diverter gate 750 mm to route parts, tracked by DMSE switches in the barrel groove.
Is the Airtac SAI32 Standard Cylinder SAI32BX750S the Right Cylinder?
Selecting this 32 mm bore unit makes sense when application thrust requirements sit near 402 N at 0.5 MPa. If your mechanism demands greater power, stepping up to the 40 mm bore yields 628 N of push force. Conversely, if the load is minimal, dropping to a smaller profile cylinder saves space. Because this model features a 750 mm stroke, the extended rod is highly susceptible to bending under side loads; always utilize an external linear guide or a guided cylinder carriage to prevent premature rod-bearing wear.
As a dimensionally interchangeable ISO 15552 cylinder, this unit serves as a direct replacement for other standard profile cylinders sharing the same 32 mm bore, 750 mm stroke, PT port, and mounting accessory dimensions. Note that standard air cushions only decelerate the piston near stroke ends and do not act as a locking mechanism; if the pneumatic supply is lost, the load will drift. Use an external pilot-operated check valve or the SAIL lock variant for position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32BX750S FAQ
At 0.5 MPa, this double-acting cylinder provides 402 N of push force and 345 N of pull force. It can reach 724 N of push force at 0.9 MPa.
Yes, it features a true ISO 15552 mounting interface, making it dimensionally interchangeable with other ISO 15552 profile cylinders of the same 32 mm bore and 750 mm stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32BX750S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.