
The AirTAC SAI32 Standard Cylinder SAI32X1000S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 1000mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAI32X1000-S is a double-acting ISO 15552 profile cylinder engineered for long-reach linear motion. Delivering a push force of 563 N at 0.7 MPa, this 32 mm bore actuator features a 1000 mm stroke. It is built with an extruded aluminum barrel and includes a magnet for position sensing.
Because 1000 mm exceeds the standard maximum stroke for this bore, it is manufactured as a made-to-order unit. It features a carbon steel piston rod for structural rigidity over the extended length. The barrel includes sensor grooves on both sides, allowing direct mounting of CMSE or DMSE reed switches to confirm end-of-stroke positions.
| Model | Airtac SAI32 Standard Cylinder SAI32X1000S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Extends 1000 mm to push heavy cartons between parallel conveyor lines without requiring multiple staged actuators.
Provides the extended reach needed to eject packaged goods from deep storage racks prior to sorting.
Moves workpieces across wide machine beds, utilizing the 563 N push force to overcome sliding friction.
Selecting this 1000 mm non-standard stroke requires careful attention to mechanical stability. At full extension, the unsupported rod is highly susceptible to bending under side loads. For optimal longevity, pair this cylinder with external linear guides or choose a fully guided cylinder to prevent rod-bearing damage. If your application requires less reach but similar thrust, stepping down to a shorter stroke reduces lateral deflection while maintaining the 402 N push force at 0.5 MPa.
This model uses a G1/8 PT tapered port and includes adjustable air cushions at both ends to decelerate the piston. As a true ISO 15552 profile cylinder, it offers a direct dimensional replacement for other standard 32 mm bore actuators using FA, FB, or LB mounting accessories. Note that the standard SAI does not hold position when air pressure is lost; if load holding is required, consider the SAIL locking variant.
AirtacDistr lists every SAI32 order code with its price on one page at https://airtacdistr.com/products/airtac-sai32-iso-air-cylinder
Quick checklist
At 0.7 MPa operating pressure, this 32 mm bore cylinder provides a push force of 563 N and a pull force of 345 N.
Yes, the SAI32X1000-S is dimensionally interchangeable per ISO 15552. You can drop it into existing 32 mm bore foot or flange mounts using standard G1/8 ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.