
The AirTAC SAI32 Standard Cylinder SAI32X120S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 120mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAI32X120-S is a double-acting ISO 15552 profile cylinder featuring a 32mm bore and 120mm stroke. It delivers a push force of 402 N at 0.5 MPa, making it well-suited for compact, light-duty automation tasks. The extruded aluminum barrel design omits tie rods, providing a clean exterior that drops directly into standard ISO 15552 mounting footprints.
This specific configuration includes a piston magnet for use with CMSE and DMSE sensor switches, which seat neatly into the dual grooves machined into both sides of the barrel. The standard carbon steel piston rod ensures durable performance, while the PT tapered port threads match legacy pneumatic layouts. As a genuine AirTAC component, it provides reliable, interchangeable operation for global machinery builders.
| Model | Airtac SAI32 Standard Cylinder SAI32X120S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides reliable 402N push force at 0.5 MPa to eject small molded or machined components from automated fixtures.
Actuates lightweight diverter arms on packaging lines where a compact 120mm stroke and dual-side sensor grooves ensure precise timing.
Secures thin materials or cartons during secondary processing, using the carbon steel rod for consistent, repeatable clamping pressure.
With a 120mm stroke, this 32mm bore cylinder fits perfectly into space-constrained assemblies where a 100mm stroke falls short but a 150mm reach is excessive. If your application requires slightly less force, stepping down is not an option below 32mm in the SAI line, but stepping up to a 40mm bore yields 628 N at 0.5 MPa if your supply pressure drops.
Because the stroke is under 300mm, rod-bearing bending is minimal, but always verify side-load limits. Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold the load. If your fixture drops when air pressure is lost, you must integrate an external pilot-operated check valve or select the SAIL locking variant. To match this cylinder, specify the 32mm bore, 120mm stroke, PT port thread, and the -S magnet option, utilizing standard FA flange or LB foot mounts.
AirtacDistr lists every SAI32 order code with its price on one page at https://airtacdistr.com/products/airtac-sai32-iso-air-cylinder
Quick checklist
At a standard operating pressure of 0.5 MPa, this 32mm bore cylinder generates 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N.
Yes, the SAI32X120-S is dimensionally interchangeable per ISO 15552. It matches the standard mounting interface and stroke length of comparable 32mm bore profile cylinders from other manufacturers, though it is not identical to any specific brand's part.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.