
The AirTAC SAI32 Standard Cylinder SAI32X150 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAI32X150 is a double-acting ISO 15552 profile cylinder featuring a 32mm bore and 150mm stroke. It generates 402N of push force at 0.5 MPa, making it well-suited for compact automation tasks requiring moderate reach. The extruded aluminum barrel design omits tie rods, providing a clean exterior that drops directly into standard ISO 15552 mounting footprints.
This configuration uses a standard carbon steel piston rod and PT tapered port threads. Because it lacks a magnet, it does not support reed or solid-state sensors; add the -S suffix if CMSE or DMSE switches are needed for position detection.
| Model | Airtac SAI32 Standard Cylinder SAI32X150 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides 402N of push force at 0.5 MPa to reliably eject small molded components from machining centers.
Utilizes the 150mm stroke to push lightweight parcels off a main conveyor belt into secondary packaging chutes.
Drives low-profile clamping mechanisms on automated welding fixtures where a compact 32mm body is required.
Select this 32mm bore when an application requires 402N of push force at 0.5 MPa. If your assembly needs less force, stepping down is not an option in this series, but moving up to a 40mm bore increases output to 628N. At a 150mm stroke, the unsupported rod length is moderate, but operators should still verify alignment to prevent premature rod-bearing wear.
This model functions purely as a pneumatic actuator and will drift if air pressure is lost. For gravity-loaded vertical applications requiring static holding during exhaust or valve centering, specify the SAIL variant with an air-released lock or integrate an external pilot check valve. Replacement units must match the 32mm bore, 150mm stroke, G1/8 port, and desired mounting accessory.
AirtacDistr lists every SAI32 order code with its price on one page at https://airtacdistr.com/products/airtac-sai32-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 32mm bore cylinder provides 402N of push force and 345N of pull force. If pressure increases to 0.7 MPa, the push force rises to 563N.
Yes, the SAI32X150 is dimensionally interchangeable per ISO 15552. You can drop it into existing mounts matching the 32mm bore and 150mm stroke, provided the G1/8 port and accessory dimensions align.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.