Airtac SAI32 Standard Cylinder SAI32X195
The AirTAC SAI32 Standard Cylinder SAI32X195 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke195 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32X195
The AirTAC SAI32X195 is a double-acting ISO 15552 profile cylinder offering 402N push force at 0.5 MPa. Its 195mm stroke is well-suited for compact automation tasks requiring precise linear movement. The extruded aluminum barrel design omits tie rods, providing a clean exterior.
This model features a standard carbon steel piston rod and utilizes a PT tapered port thread. For environments requiring high-temperature resistance up to 70 C, Viton (H) seals can be specified instead of the standard TPU. The barrel includes dual-side sensor grooves for adding CMSE or DMSE switches if a magnet is needed later.
Airtac SAI32 Standard Cylinder SAI32X195 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32X195 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32X195
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32X195 Is Used
Small Parts Assembly
Drives precise 195mm movements for assembling electronic components and small consumer goods.
Package Diverting
Actuates sorting gates on conveyor lines where 402N of push force at 0.5 MPa is sufficient.
Material Ejection
Pushes light workpieces out of machining fixtures with reliable double-acting power.
Is the Airtac SAI32 Standard Cylinder SAI32X195 the Right Cylinder?
Choose the 32mm bore when your application requires around 400N of push force at 0.5 MPa, or step up to the 40mm bore for 628N. The 195mm stroke provides adequate travel for mid-range actuation without approaching the 1000mm maximum standard limit.
Because the stroke is under 300mm, side-load stress on the rod bearing is minimal, though external guides are always recommended for heavy radial loads. Note that a standard SAI cylinder relies on air pressure to hold its load; if the air supply drops, the piston will drift. For position holding without live pressure, consider the SAIL variant with an air-released lock or the BSAI clamp-lock type. This unit is dimensionally interchangeable per ISO 15552, featuring a G1/8 port, M10x1.25 rod thread, and compatibility with LB foot mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32X195 FAQ
The SAI32X195 generates 402N of push force and 345N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 563N.
Yes, the SAI32X195 is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 cylinders. It uses a G1/8 port and standard mounting interfaces.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32X195
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.