Airtac SAI32 Standard Cylinder SAI32X300
The AirTAC SAI32 Standard Cylinder SAI32X300 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 300mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke300 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32X300
The AirTAC SAI32X300 is a double-acting ISO 15552 profile cylinder featuring a 32mm bore and 300mm stroke. It provides 402N of push force at 0.5 MPa, making it a solid choice for standard linear actuation tasks.
This model features a standard carbon steel piston rod and uses PT threaded G1/8 ports. The extruded aluminum barrel includes dual sensor grooves, allowing for direct CMSE or DMSE switch mounting when a magnet is specified.
Airtac SAI32 Standard Cylinder SAI32X300 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32X300 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32X300
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32X300 Is Used
Small Part Ejection
Ideal for pushing lightweight machined components out of a CNC workspace using its 402N push force.
Package Diverting
Provides the stroke length needed to actuate lightweight sorting gates on packaging conveyor lines.
Material Handling
Suitable for moving small tote bins between workstations without requiring high force output.
Is the Airtac SAI32 Standard Cylinder SAI32X300 the Right Cylinder?
If your application requires less force, the SAI32 is the baseline bore, so you would step up to the SAI40 (628N at 0.5 MPa) for heavier loads. At a 300mm stroke, the unsupported rod is susceptible to bending under side loads; utilizing an external guide rail or a guided cylinder is strongly recommended to prevent premature rod-bearing wear.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders. To match this exact unit, specify a 32mm bore, 300mm stroke, G1/8 PT ports, and your preferred mounting accessory such as an LB foot or FA flange. Note that a plain SAI does not hold its load if air pressure is lost; use the SAIL variant for pneumatic locking requirements.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32X300 FAQ
At an operating pressure of 0.5 MPa, the SAI32X300 generates a push force of 402N and a pull force of 345N.
Yes, the SAI32X300 is a genuine ISO 15552 profile cylinder, making it dimensionally interchangeable with other standard ISO 15552 cylinders of the same bore size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32X300
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.