Airtac SAI32 Standard Cylinder SAI32X50S
The AirTAC SAI32 Standard Cylinder SAI32X50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke50 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32X50S
The AirTAC SAI32X50-S is a double-acting ISO 15552 profile cylinder engineered for compact automation. Delivering 402N of push force at 0.5 MPa, its 50mm stroke is ideal for short-travel clamping and indexing tasks. The extruded aluminum barrel design eliminates tie rods, providing a clean exterior that integrates seamlessly into modern machinery.
Equipped with a standard magnet (-S), this unit supports CMSE and DMSE reed switches via dual sensor grooves machined into both sides of the barrel. The factory-configured carbon steel piston rod provides reliable service in general industrial environments, while the adjustable pneumatic cushions at both ends ensure quiet end-of-stroke deceleration.
Airtac SAI32 Standard Cylinder SAI32X50S Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32X50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32X50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32X50S Is Used
Short-Stroke Clamping
Provides 402N of clamping force at 0.5 MPa for securing small machined components during secondary operations.
Diversion Arm
Powers compact routing mechanisms on packaging lines where a 50mm travel distance is sufficient to redirect product flow.
Ejection Station
Exerts rapid ejection thrust to clear lightweight finished parts from press beds, utilizing its 30-800 mm/s speed capability.
Is the Airtac SAI32 Standard Cylinder SAI32X50S the Right Cylinder?
For applications requiring slightly less force, the SAI40X50 offers 628N at 0.5 MPa, whereas stepping down is not an option below 32mm in this series. When specifying this 50mm stroke model, ensure the mounting interface matches your ISO 15552 footprint requirements, including the G1/8 PT port and compatible mounting accessories like LB foot brackets or FA flanges.
Because this is a standard double-acting cylinder, it will not hold a load if air pressure drops or the valve is centered; the piston will drift. If your application demands fail-safe position holding without continuous live pressure, consider integrating the SAIL variant with an air-released lock or utilizing an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32X50S FAQ
At an operating pressure of 0.5 MPa, the SAI32X50-S generates 402N of push force and 345N of pull force. At 0.7 MPa, the push force increases to 563N.
Yes, the -S suffix indicates this model includes a standard magnet. It is fully compatible with CMSE and DMSE series switches, which mount directly into the dual sensor grooves on the barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32X50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.