Airtac SAI50 Standard Cylinder SAI50X900SN
The AirTAC SAI50 Standard Cylinder SAI50X900SN is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 900mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke900 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI50 Standard Cylinder SAI50X900SN
The AirTAC SAI50X900-S is a double-acting ISO 15552 profile cylinder engineered for a 50mm bore and a 900mm stroke. It generates 982N of push force and 825N of pull force at 0.5 MPa, placing it in a versatile mid-range thrust class for automated machinery.
This specific configuration incorporates a piston magnet for use with CMSE and DMSE reed switches, utilizing the dual sensor grooves extruded into the aluminum barrel. It is built with standard carbon steel piston rod material and NBR seals, making it a highly reliable choice for general industrial pneumatic applications.
Airtac SAI50 Standard Cylinder SAI50X900SN Technical Specifications
| Model | Airtac SAI50 Standard Cylinder SAI50X900SN |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI50 Standard Cylinder SAI50X900SN
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI50 Standard Cylinder SAI50X900SN Is Used
Long-Stroke Material Handling
Ideal for pushing products or actuating diverters across wide conveyor belts where a 900mm travel distance is required.
Pallet Push-Off Mechanisms
Provides the 982N push force at 0.5 MPa needed to index packages or empty pallets in automated sorting hubs.
Large Door Actuation
Suitable for opening and closing large machine safety doors or guards, using the integrated magnet for position sensing.
Is the Airtac SAI50 Standard Cylinder SAI50X900SN the Right Cylinder?
If an application requires less thrust, stepping down to a 40mm bore yields 628N of push force at 0.5 MPa, whereas upgrading to a 63mm bore provides 1559N for heavier loads. At a 900mm stroke, the extended rod is highly susceptible to bending under side loads; utilizing an external guide rail or a fully guided cylinder is strongly recommended to prevent premature rod bearing wear.
This SAI50X900-S is dimensionally interchangeable per ISO 15552, featuring a G1/4 PT port, standard 50mm mounting accessories, and an integrated magnet (-S). Note that this cylinder relies on adjustable air cushions to decelerate the piston at stroke ends and will not hold a load if air pressure is lost; for position holding, consider the SAIL or BSAI locking variants.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI50 Standard Cylinder SAI50X900SN FAQ
At 0.5 MPa, this 50mm bore cylinder provides 982N of push force and 825N of pull force. At 0.7 MPa, the push force increases to 1374N.
Yes, the SAI50X900-S shares the exact ISO 15552 mounting interface and dimensions, making it a direct replacement for other ISO 15552 profile cylinders of the same bore size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI50 Standard Cylinder SAI50X900SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.