Airtac SAI63 Standard Cylinder SAI63AX150
The AirTAC Airtac SAI63 Standard Cylinder SAI63AX150 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 150mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ63 mm
- Stroke150 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
About the Airtac SAI63 Standard Cylinder SAI63AX150
The AirTAC SAI63X150 is a double-acting ISO 15552 profile cylinder offering a practical 150mm stroke. It generates 1559N of push force at 0.5MPa, making it a robust choice for medium-duty automation. The extruded aluminum barrel design omits tie rods, providing a clean exterior that drops right into existing ISO 15552 mounting interfaces.
This specific configuration features a SUS420J2 stainless steel piston rod (material code A) for superior corrosion resistance in humid environments. It uses PT tapered port threads and, because no magnet is specified, is optimized purely for mechanical actuation without sensor tracking.
Airtac SAI63 Standard Cylinder SAI63AX150 Technical Specifications
| Model | Airtac SAI63 Standard Cylinder SAI63AX150 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI63 Standard Cylinder SAI63AX150
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI63 Standard Cylinder SAI63AX150 Is Used
Automated Clamping
Provides reliable 1559N clamping force at 0.5MPa for holding medium-sized metal castings during CNC machining operations.
Product Diverting
Actuates a diverter arm across a 150mm stroke to route packages on a high-speed packaging line.
Press Operations
Supplies steady downward pressure for light assembly presses, fitting bearings or pins into housings.
Is the Airtac SAI63 Standard Cylinder SAI63AX150 the Right Cylinder?
Choose the 63mm bore when 50mm falls short—its 1559N push force at 0.5MPa comfortably outmuscles the 982N of the SAI50. If your application requires less force, stepping down to a 40mm bore yields 628N and saves space. At 150mm stroke, side-load stress is minimal, but always ensure rigid mounting to prevent rod-bearing wear.
If the machine loses air pressure, this cylinder cannot hold a load vertically; the piston will drift. Use the SAIL variant with an air-released lock or an external pilot-operated check valve for fail-safe holding. This model is dimensionally interchangeable with other ISO 15552 cylinders, requiring a G3/8 port, standard mounting accessories, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI63 Standard Cylinder SAI63AX150 FAQ
At 0.5MPa, this 63mm bore cylinder provides 1559N of push force and 1402N of pull force. At the maximum operating pressure of 1.0MPa, it can deliver up to 318kgf of theoretical force.
No, the standard SAI cylinder does not hold position without live air pressure. For fail-safe load holding, you should use the SAIL variant with an air-released lock or an external rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI63 Standard Cylinder SAI63AX150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.