Airtac SAIF Series Standard Cylinder with Valve SAIF100X100-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X100-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 100mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke100 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X100-10A
The AirTAC SAIF100X100-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. The built-in valve provides an effective flow area of 30.0 mm2 (Cv 1.68) and mounts directly via a manifold block using O10 x O6.5 PU tubing. Driven by an AC220V terminal connection coil drawing 3.5 VA, it achieves IP65 protection and responds in 0.05 s. While the cylinder body rates to 1.0 MPa, the valved assembly operates at 0.15-0.8 MPa.
This 100mm bore unit delivers substantial thrust, pushing 7068N at 0.9 MPa. It switches itself from one coil signal, eliminating remote valves and excess plumbing for decentralized machine stations. Factory set to retract when energised, the 5/2 valve can be repositioned to extend on signal. The cylinder port is PT1/2, while the valve port is PT3/8.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X100-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X100-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X100-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×100 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X100-10A Is Used
Decentralized Automation
Eliminates remote valve panels on large machines by driving the 7068N thrust directly from a single AC220V signal at the station.
High-Force Clamping
Provides substantial 0.9 MPa clamping power in compact work cells where installing separate 4M310 valves and tubing is impractical.
Retrofit & Upgrade
Replaces standard ISO 15552 cylinders to add self-switching logic without re-plumbing main air lines, cutting panel space and wiring.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X100-10A the Right Choice?
Select this 100mm bore model when an application requires high thrust (up to 7068N push at 0.9 MPa) and benefits from a self-contained actuator. If lower force is acceptable, stepping down to the 80mm bore yields 4523N push at 0.9 MPa with a smaller footprint. The SAIF100X100-10A is ideal for space-tight machines where running separate valve tubing is costly. It does not hold loads without live pressure; the 5/2 valve routes air but is not a lock, and the adjustable air cushions only decelerate near stroke end. For load-holding, consider SAIL or BSAI types. Replacement requires matching bore, stroke, PT3/8 valve port, AC220V voltage, terminal entry, PT thread, and magnet status.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X100-10A FAQ
The 100mm bore generates a push force of 7068N at 0.9 MPa. The built-in 4M310-10 valve has an effective area of 30.0 mm2 (Cv 1.68) and a max frequency of 4 cycles/sec.
Yes. The factory setting retracts the piston rod when the AC220V coil is energised, but repositioning the 5/2 valve allows it to extend when energised. No separate remote valve is needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X100-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.