Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 1000mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke1000 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10A
The AirTAC SAIF100X1000-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This specific build pairs a 100mm bore with a 1000mm stroke, utilizing a PT3/8 cylinder port and a 1/2 inch valve port. Driven by an AC220V terminal entry coil drawing 3.5 VA, the valve provides a 30.0 mm2 orifice (Cv 1.68) and switches up to 4 cycles per second. Because the valve operates at 0.15-0.8 MPa, this defines the practical working pressure range for the assembled unit, even though the cylinder body itself rates to 1.0 MPa.
Generating a substantial 5497N push force at 0.7 MPa, this decentralized unit eliminates the need for a separate remote valve and extensive panel plumbing. The manifold connects to the cylinder via PU tubing (O10 x O6.5). From the factory, the piston rod retracts when the coil is energised, but this can be reconfigured to extend-when-energised simply by repositioning the valve. The assembly features a standard carbon steel rod and PT tapered threads.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×1000 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10A Is Used
Decentralized Heavy Lifting
Ideal for large assembly lines where routing air to a remote valve bank is costly. The built-in 4M310 valve handles the 5497N push force directly at the station.
Long-Stroke Material Handling
The 1000mm stroke easily pushes heavy pallets or diverters. The self-contained AC220V valve minimizes response lag over long distances.
Space-Constrained Machinery
Saves valuable panel space by mounting the 5/2 valve directly on the cylinder profile, removing the need for external manifold plumbing.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10A the Right Choice?
Choose this 100mm bore when a smaller 80mm unit (providing 3518N push at 0.7 MPa) lacks the necessary thrust for heavy lifting. The integrated 4M310 valve means you only need to run a single AC220V electrical signal to the terminal entry, drastically reducing wiring and tubing compared to a traditional cylinder with a remote valve bank. This makes it highly effective for decentralized stations across large machines.
For this 1000mm stroke, incorporating a side-load guide is strongly recommended to prevent rod damage and premature seal wear. Remember that the 5/2 valve routes air and is not a lock; if the machine requires true load-holding without live pressure, consider the SAIL lock variant. To replace this unit, match the 100mm bore, 1000mm stroke, 1/2 inch valve port, AC220V voltage, terminal entry, PT threads, and standard carbon steel rod (no magnet).
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10A FAQ
At 0.7 MPa operating pressure, the 100mm bore generates a push force of 5497N and a pull force of 3681N. The integrated 4M310-10 valve has an effective area of 30.0 mm2 (Cv 1.68) to handle the required air volume.
No, the built-in 5/2 solenoid valve switches the cylinder directly from an AC220V terminal connection. By factory default, the rod retracts when the coil is energised, but it can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.