Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 1000mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke1000 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10B
The AirTAC SAIF100X1000-10B is a double-acting ISO 15552 profile cylinder with a built-in 4M310-10 5/2 solenoid valve, delivering a 30.0 mm2 orifice (Cv 1.68) for high flow. It is driven by a DC24V terminal coil consuming 3.0 W, protected to IP65 with a 0.05 s activation time. Because the cylinder rates to 1.0 MPa but the internal piloted valve operates at 0.15-0.8 MPa, the practical working range for this assembled unit is 0.15-0.8 MPa.
Generating 3927 N of push force at 0.5 MPa and up to 801 kgf at 1.0 MPa, it eliminates the need for a separate remote valve. The manifold connects via PU tubing (O10 x O6.5), and by factory default, the piston rod retracts when the coil is energised; repositioning the valve reconfigures it to extend-when-energised.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×1000 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10B Is Used
Decentralized Automation
Ideal for large-scale machines where running individual valve tubing back to a central manifold is costly, allowing each station to switch itself via a single DC24V signal.
Heavy Material Handling
Delivers up to 3927 N of push force at 0.5 MPa for moving heavy pallets or fixtures directly at the work cell without external plumbing.
Space-Constrained Retrofitting
Suits machine upgrades where panel space is tight, mounting the 5/2 valve directly on the ISO 15552 profile barrel to minimise the overall footprint.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10B the Right Choice?
Choose this 100mm bore when the 80mm class (2268 N pull at 0.5 MPa) is insufficient for heavy loads. A self-valved SAIF beats a separate cylinder plus remote valve by cutting tubing runs, saving panel space, and simplifying wiring for decentralized stations across large machines. This SKU specifies a PT3/8 cylinder port, a 3/8 valve port, DC24V voltage, terminal entry, and no magnet (-S omitted, so CMSE/DMSE sensors are not supported). To replace it, match the 100mm bore, 1000mm stroke, 4M310-10 valve, DC24V terminal coil, and PT thread.
Because the stroke is 1000mm, mounting requires a guide to prevent side-load damage. Note that the 5/2 valve routes air but does not hold the load without live pressure; for true locking, select the SAIL series instead.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10B FAQ
The 100mm bore generates 3927 N push force at 0.5 MPa and 5497 N at 0.7 MPa. The integrated 4M310-10 valve provides a 30.0 mm2 effective area (Cv 1.68) with a max frequency of 4 cycles/sec.
By factory default, energising the DC24V terminal coil retracts the piston rod. Because it uses a 5/2 pilot valve rather than a spring, you can reconfigure it to extend-when-energised simply by repositioning the valve on the manifold.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X1000-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.