Airtac SAIF Series Standard Cylinder with Valve SAIF100X100S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X100S-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 100mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke100 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X100S-10A
The AirTAC SAIF100X100S-10A is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve. Driven by an AC220V terminal coil consuming 3.5 VA, it achieves a 0.05s response and IP65 protection. The integrated valve delivers a 30.0mm2 orifice (Cv 1.68) and handles up to 4 cycles per second. Because the valve manifold uses O10xO6.5 PU tubing, the 1/2 inch cylinder port and 3/8 inch valve port remain distinct. This self-contained assembly switches itself from one electrical signal, eliminating remote plumbing and saving panel space.
While the bare cylinder rates to 1.0 MPa, the practical operating range for this valved unit is 0.15-0.8 MPa. It delivers substantial thrust, pushing 5497N and pulling 3681N at 0.7 MPa. By default, the rod retracts when the coil is energised, but you can reposition the valve to extend on signal. The -S magnet supports CMSE reed and DMSE electronic sensors for exact position tracking.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X100S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X100S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X100S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×100 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X100S-10A Is Used
Decentralized Heavy Automation
Perfect for large-scale production lines where installing remote valve islands is impractical, providing local 5497N thrust from a single AC220V signal.
High-Force Clamping Stations
Ideal for heavy-duty machining fixtures requiring rapid actuation, utilizing the built-in 4M310 valve's 4 cycles per second capability without external plumbing.
Space-Constrained Machinery
Suits compact equipment envelopes where both a 100mm bore cylinder and a separate 4M310 valve cannot fit, saving valuable panel and framework space.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X100S-10A the Right Choice?
Choose this 100mm bore when you need maximum force in a decentralized layout; stepping down to an 80mm bore yields 3518N push at 0.5 MPa, while this 100mm unit provides 3927N at the same pressure. The SAIF100X100S-10A is ideal for large machines where running separate valve tubing is costly or space-prohibitive. It includes a carbon steel rod and PT tapered threads. Remember that the 5/2 valve routes air but does not lock the load mechanically—use a SAIL lock cylinder for position holding.
To replace this unit, match the 100mm bore, 100mm stroke, 3/8 inch valve port (code 10), AC220V terminal coil, PT threads, and the -S magnet. Since the stroke is 100mm, no side-load guide note is required, but always ensure the 1.2 MPa proof pressure and 30-800mm/s speed range suit your air supply.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X100S-10A FAQ
At an operating pressure of 0.7 MPa, this double-acting 100mm bore cylinder provides a push force of 5497N and a pull force of 3681N. The maximum thrust is 801 kgf at 1.0 MPa, though the practical working range is 0.15-0.8 MPa due to the built-in valve limits.
It uses a 4M310-10 5/2 solenoid valve operating on AC220V. By factory default, the piston rod retracts when the coil is energised, but this can be reconfigured to extend-when-energised by repositioning the valve. This self-contained design eliminates the need for a separate remote valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X100S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.