Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 150mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke150 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10B
The AirTAC SAIF100X150-10B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This specific SKU is configured with a DC24V terminal electrical entry drawing 3.0 W, a PT3/8 valve port, and a PT1/2 cylinder port. The built-in valve offers a 30.0 mm2 effective area (Cv 1.68) and switches at a maximum frequency of 4 cycles per second. Because the valve manifold uses O10 x O6.5 PU tubing to bridge to the cylinder, you eliminate long remote air lines and save panel space.
Although the bare cylinder body rates to 1.0 MPa, the practical operating pressure for this assembled unit is 0.15-0.8 MPa due to the internal pilot valve limits. In its factory setting, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised if your sequence requires it. At 0.5 MPa, this 100 mm bore generates 3927 N of push force and 3681 N of pull force, operating at speeds of 30-800 mm/s.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×150 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10B Is Used
Decentralized Heavy Forming
Ideal for large pressing or forming stations spread across a factory floor, delivering 3927 N push force at 0.5 MPa without needing a centralized valve bank.
High-Force Clamping
Provides robust clamping on large machining fixtures where space is tight, using the integrated 4M310 valve to minimize external tubing.
Material Handling Diverters
Powers heavy-duty diverters and stops on conveyor lines, responding in 0.05 s via a DC24V terminal signal for rapid actuation.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10B the Right Choice?
Choose this 100 mm bore when you need heavy thrust that smaller neighbours cannot provide; stepping down to an 80 mm bore drops your 0.5 MPa push force to 2513 N. The SAIF100X150-10B excels in decentralized installations where routing a separate valve island would be costly or space-prohibitive. A single DC24V terminal connection drives the entire actuator, simplifying machine wiring. Remember that the 5/2 valve routes air but does not lock the load; if you need true position holding without live pressure, consider an AirTAC SAIL lock cylinder instead. When replacing, verify the 150 mm stroke, 1/2 inch cylinder port, 3/8 inch valve port, DC24V voltage, terminal entry, PT threads, and absence of a magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10B FAQ
At 0.5 MPa, this 100 mm bore cylinder generates 3927 N of push force and 3681 N of pull force. The integrated 4M310-10 valve has an effective area of 30.0 mm2 (Cv 1.68) and supports a maximum frequency of 4 cycles per second.
No, the SAIF100X150-10B switches itself using the built-in 4M310 5/2 valve driven by a DC24V terminal coil. By default, the rod retracts when energised, but you can reconfigure the valve to extend-when-energised by repositioning it.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X150-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.