Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 175mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke175 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10A
The AirTAC SAIF100X175-10A is a double-acting ISO 15552 profile cylinder with a built-in 4M310-10 5/2 solenoid valve, delivering a Cv of 1.68 and 30.0 mm2 effective area. It features a 100mm bore generating 3927N push force at 0.5 MPa and a PT1/2 cylinder port. Equipped with an AC220V terminal entry coil drawing 3.5 VA, it switches in 0.05s with IP65 protection. The manifold connects to the cylinder via O10 x O6.5 PU tubing.
Because the cylinder rates to 1.0 MPa but the integrated valve operates at 0.15-0.8 MPa, the practical working range for this assembled unit is 0.15-0.8 MPa. By default, the piston rod retracts when the coil is energised, but you can reconfigure it to extend-when-energised by repositioning the valve. This self-switching design eliminates remote plumbing, saving panel space for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×175 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10A Is Used
Decentralized Automation
Perfect for large factory layouts where installing remote valve islands is impractical, letting each 100mm bore station operate independently via a single AC220V signal.
High-Force Clamping
Delivers 3927N of push force at 0.5 MPa for heavy-duty machining and clamping tasks without needing external pneumatic plumbing.
Space-Constrained Retrofitting
Ideal for upgrading existing machinery where panel space is tight, integrating the 4M310-10 valve directly on the ISO 15552 profile body.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10A the Right Choice?
Choose this 100mm bore when you need high thrust (up to 801 kgf at 1.0 MPa) in a self-contained package. If your application requires less force, stepping down to the 80mm bore yields 2513N push at 0.5 MPa, which may suit lighter loads. The SAIF100X175-10A is ideal for decentralized installations where running separate valve tubing is costly, as one AC220V terminal signal drives the entire actuator.
When specifying this model, note the 3/8" valve port differs from the 1/2" cylinder port. The 5/2 valve routes air but does not lock the load; if you need true position holding without live pressure, consider the AirTAC SAIL lock cylinder or BSAI clamp-lock instead. For replacements, match the 100mm bore, 175mm stroke, 10 valve port, AC220V voltage, terminal entry, PT thread, and no magnet. Since the stroke is under 300mm, standard side-load guidelines apply.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10A FAQ
The 100mm bore generates 3927N push and 3681N pull force at 0.5 MPa. The built-in 4M310-10 valve provides an effective area of 30.0 mm2 with a Cv of 1.68.
It uses an AC220V terminal entry coil (3.5 VA, IP65) to drive the 5/2 valve. Factory setting retracts the rod when energised, but you can reposition the valve to extend-when-energised. No separate remote valve is needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.