Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 175mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke175 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10B
The AirTAC SAIF100X175-10B is a double-acting ISO 15552 profile cylinder featuring a built-in 4M310-10 5/2 solenoid valve. This specific SKU is configured with a DC24V terminal electrical entry consuming 3.0 W, a PT3/8 cylinder port, and a 3/8 valve port. The integrated valve provides an effective flow area of 30.0 mm2 (Cv 1.68) and handles up to 4 cycles per second. Because the cylinder body rates to 1.0 MPa but the internal pilot valve operates at 0.15-0.8 MPa, the practical working pressure for this assembled unit is 0.15-0.8 MPa.
Delivering 3927 N of push force at 0.5 MPa (and up to 7068 N at 0.9 MPa), it eliminates the need for a separate remote valve. The manifold connects to the cylinder via PU tubing (O10 x O6.5), saving panel space. From the factory, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised if your sequence requires it.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×175 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10B Is Used
Heavy Automated Pressing
Ideal for high-force pressing and clamping in robotic cells where a single DC24V signal must actuate a 100 mm bore without a remote valve bank.
Decentralized Plant Stations
Perfect for large assembly lines, saving panel space by mounting the 4M310 valve directly on the cylinder to reduce complex pneumatic plumbing.
Retrofit Space-Tight Machines
Simplifies upgrades on older machinery where routing new air tubes to a central manifold is physically impossible or too costly.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10B the Right Choice?
Choose this 100 mm bore when you need maximum thrust in a decentralized layout; stepping down to an 80 mm bore drops the 0.5 MPa push force to 2513 N. This self-valved SAIF unit excels in large machines where running separate valve tubing is costly, as one coil signal directly drives the action. It uses a carbon steel piston rod and PT tapered threads. For position feedback, you would need to specify the -S magnet option to use AirTAC CMSE (reed) or DMSE (electronic) sensors.
Remember that the built-in 5/2 valve routes air but does not lock the load mechanically; if you need true load-holding, look at the SAIL lock series. To replace this cylinder, match the 100 mm bore, 175 mm stroke, 3/8 valve port, DC24V terminal coil, and PT thread.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10B FAQ
At 0.5 MPa, this 100 mm bore cylinder generates 3927 N of push force and 3681 N of pull force. The built-in 4M310-10 valve has a 3/8 port with an effective area of 30.0 mm2 (Cv 1.68).
No, it has an integrated 5/2 valve that switches directly from a DC24V terminal coil signal. By factory default, the rod retracts when energised, but you can reconfigure the valve to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X175-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.