Airtac SAIF Series Standard Cylinder with Valve SAIF100X225S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X225S-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 225mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke225 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X225S-10A
The AirTAC SAIF100X225S-10A is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve, delivering a high Cv 1.68 flow rate. Driven by an AC220V terminal-entry coil consuming 3.5 VA, it operates reliably within the 0.15-0.8 MPa range dictated by the integrated valve, despite the bare cylinder rating of 1.0 MPa. The standard carbon steel rod and -S magnet enable precise position sensing with CMSE reed or DMSE electronic switches.
Providing immense thrust up to 3927N at just 0.5 MPa, this 100mm bore unit eliminates the need for separate remote valves. The factory setting retracts the piston rod when the coil is energised, but you can reposition the valve to extend on signal. The manifold connects via PU tubing (O10 x O6.5), and the valve port (3/8) differs from the cylinder port (1/2), ensuring optimal airflow for high-speed 30-800 mm/s cycles.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X225S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X225S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X225S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×225 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X225S-10A Is Used
Decentralized Assembly Lines
Ideal for large-scale manufacturing where individual cylinder control via a single AC220V wire simplifies machine wiring and eliminates bulky remote valve islands.
Heavy Material Handling
Delivers up to 3927N push force at 0.5 MPa for lifting and transferring heavy workpieces, utilizing the high Cv 1.68 built-in 4M310 valve for rapid actuation.
Space-Constrained Retrofitting
Perfect for machinery upgrades where pneumatic plumbing space is tight, using the integrated manifold and O10xO6.5 PU tubing to minimize external fittings.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X225S-10A the Right Choice?
Select this 100mm bore model when an 80mm cylinder (providing 2513N push force at 0.5 MPa) is insufficient for heavy handling. The self-contained SAIF100X225S-10A excels in decentralized stations where running separate valve tubing is costly, saving panel space and wiring. It includes a PT tapered thread and an -S magnet for sensors.
Remember that the built-in 5/2 valve routes air but does not lock the load; for true position holding under pressure loss, consider a SAIL lock or BSAI clamp-lock cylinder. To replace this unit, match the 100mm bore, 225mm stroke, 10 (3/8) valve port, AC220V terminal coil, and -S magnet. Since 225mm is under the 1500mm max standard stroke, side-load guides are less critical but still recommended for heavy masses.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X225S-10A FAQ
At 0.5 MPa, this 100mm bore double-acting cylinder provides a push force of 3927N and a pull force of 3681N. It can reach a maximum push force of 801 kgf at 1.0 MPa, though the practical working pressure is limited to 0.15-0.8 MPa by the built-in valve.
It features a 4M310-10 5/2 solenoid valve operating on AC220V with a terminal entry. By default, the piston rod retracts when the coil is energised, but this can be reconfigured to extend-when-energised by repositioning the valve. It eliminates the need for a separate remote valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X225S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.