Airtac SAIF Series Standard Cylinder with Valve SAIF100X300S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X300S-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 300mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke300 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X300S-10A
The AirTAC SAIF100X300S-10A is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve, delivering a Cv of 1.68 and a 30 mm2 effective orifice. Driven by an AC220V terminal entry coil consuming 3.5 VA, it activates in 0.05 s. Because the cylinder body rates to 1.0 MPa but the integrated valve operates at 0.15-0.8 MPa, the practical working range for this assembled unit is 0.15-0.8 MPa. This 100mm bore generates 3927N of push force at 0.5 MPa and includes an -S magnet for precise position detection using CMSE reed or DMSE solid-state sensors.
By default, the piston rod retracts when the coil is energised, but you can reconfigure it to extend-when-energised simply by repositioning the valve. This decentralized design eliminates the need for a separate remote valve, drastically reducing tubing and panel space across large machines. The manifold connects to the cylinder via PU tubing (O10 x O6.5), and note that the PT3/8 cylinder port differs from the PT3/8 valve port. The standard carbon steel rod and variable air cushions ensure robust performance within the 30-800 mm/s speed range.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X300S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X300S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 300 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X300S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×300 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X300S-10A Is Used
Decentralized Automation Stations
Ideal for large machines where running valve tubing is costly; the integrated 4M310-10 valve allows the 100mm bore cylinder to switch itself from a single AC220V signal.
High-Force Clamping
Delivers 3927N of push force at 0.5 MPa for heavy-duty clamping operations, with adjustable air cushions to decelerate the large 25mm rod near stroke ends.
Space-Constrained Retrofits
Perfect for upgrading existing ISO 15552 frames where panel space is tight, eliminating the need for a remote valve manifold while providing precise DMSE sensor tracking.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X300S-10A the Right Choice?
Choose this 100mm bore when your application requires substantial thrust, such as the 3927N push force at 0.5 MPa; if your load is lighter, stepping down to the 80mm bore yields 2513N push at 0.5 MPa, saving envelope space. A self-valved SAIF unit is ideal over a separate cylinder and remote valve when you need decentralized stations with minimal wiring. For stroke lengths of 300mm or greater, always use an external guide to prevent excessive side-load on the piston rod. Remember that the 5/2 valve routes air but does not hold the load without live pressure; for true mechanical holding, consider the SAIL lock or BSAI clamp-lock series. Replacement requires matching the 100mm bore, 300mm stroke, 10 valve port, AC220V voltage, terminal entry, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X300S-10A FAQ
The 100mm bore generates 3927N push and 3681N pull force at 0.5 MPa. The built-in 4M310-10 valve provides a 30 mm2 effective orifice with a Cv of 1.68, supporting a max frequency of 4 cycles/sec.
No separate remote valve is needed. The integrated 5/2 solenoid valve switches the cylinder directly from the AC220V terminal coil signal. Factory-set to retract when energised, the valve can be repositioned to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X300S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.