Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 600mm stroke and a built-in 4M310-08 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke600 mm
- Built-in valve4M310-08
- Valve port1/4"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08A
The AirTAC SAIF100X600-08A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-08 5/2 solenoid valve. This specific SKU is configured with a PT1/2 cylinder port, a PT1/4 valve port, and an AC220V terminal coil connection drawing 3.5 VA. The built-in valve provides a 25.0 mm2 effective area (Cv 1.40) and switches at up to 4 cycles per second. Because the manifold links the valve to the cylinder via O10 x O6.5 PU tubing, you eliminate remote plumbing and save panel space. The unit operates at 0.15-0.8 MPa, as the valve pressure rating governs the practical working range despite the cylinder body rating of 1.0 MPa.
From the factory, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised if your sequence requires it. In this 100mm bore configuration, the cylinder generates 3927N of push force and 3681N of pull force at 0.5 MPa. The carbon steel piston rod and extruded aluminum barrel provide durable service, and the assembly responds in 0.05 seconds or less with an IP65 electrical rating.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-08 (5/2) |
|---|---|
| Valve flow | 25.0 mm² (Cv 1.40) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×600 | Bore × stroke in mm. |
| -08 | Valve port 1/4" → 4M310-08. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08A Is Used
Decentralized Assembly Lines
Eliminates the need for a central valve bank on large machines, letting each 100mm bore station control its own high-thrust operations directly from one coil signal.
Heavy Material Handling
Provides 3927N push force at 0.5 MPa for moving substantial workpieces, while the built-in valve ensures rapid 0.05s response without long tubing delays.
Retrofit Automation
Ideal for upgrading older machines where routing new pneumatic tubing to a remote valve island is impractical, offering a self-contained PT1/2 ported actuator solution.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08A the Right Choice?
Choose this 100mm bore SAIF when your application demands high thrust—such as 3927N push at 0.5 MPa—and you want to avoid the tubing runs of a separate remote valve. If you need less force, stepping down to a 63mm bore drops the push force to 1559N at 0.5 MPa, which may suit lighter loads. This self-valved design excels in decentralized stations across large machines where running individual valve tubing is costly and complex. The AC220V terminal entry offers straightforward wiring, but verify your control system matches this voltage before ordering. For position feedback, note this specific SKU lacks the -S magnet, so it cannot host AirTAC CMSE reed or DMSE electronic sensors without modification.
Because the stroke is 600mm, you must account for potential side loads and implement a guide mechanism to prevent rod damage and premature seal wear. Remember that the built-in 5/2 valve routes air but does not lock the load; if you need true mechanical holding power, consider an AirTAC SAIL lock cylinder instead. When ordering a replacement, confirm the 100mm bore, 600mm stroke, 4M310-08 valve, AC220V voltage, terminal entry, PT thread, and no magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08A FAQ
At 0.5 MPa, this 100mm bore cylinder generates 3927N of push force and 3681N of pull force. The integrated 4M310-08 5/2 valve has an effective area of 25.0 mm2 (Cv 1.40) and supports a maximum frequency of 4 cycles per second.
No separate remote valve is needed; the unit switches itself from one coil signal. The factory setting retracts the rod when the AC220V coil is energised, but you can reconfigure it to extend-when-energised by repositioning the valve on the manifold.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X600-08A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.