Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 700mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke700 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10A
The AirTAC SAIF100X700-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This specific SKU is configured with a PT 3/8 valve port, an AC220V terminal coil connection, and a standard carbon steel piston rod. The built-in valve provides an effective flow area of 30.0 mm2 (Cv 1.68) and operates at a maximum frequency of 4 cycles per second. Because the valve manifold routes air internally via O10 x O6.5 PU tubing, you save panel space and eliminate remote plumbing.
The cylinder itself features a 1/2 port size and generates a substantial push force of 3927 N at 0.5 MPa, climbing to 7068 N at 0.9 MPa. While the bare cylinder is rated for 1.5 MPa proof pressure, the practical operating range for this assembled SAIF unit is 0.15-0.8 MPa due to the internal piloted valve limits. From the factory, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised if your sequence requires it.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×700 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10A Is Used
Decentralized Automation
Ideal for large-scale factory lines where installing remote valve islands is impractical, allowing local control of heavy 100mm bore actuators via a single AC220V signal.
Heavy Material Handling
Provides high thrust (up to 7068 N at 0.9 MPa) for pushing or lifting heavy workpieces, with the integrated 4M310 valve ensuring responsive switching at 4 cycles per second.
Retrofit & Upgrades
Perfect for upgrading existing ISO 15552 interchangeable setups where minimizing pneumatic tubing and electrical wiring complexity is a priority.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10A the Right Choice?
Select this 100mm bore model when your application requires high thrust that smaller bores cannot provide; stepping down to an 80mm bore would reduce your push force at 0.5 MPa from 3927 N to 2513 N. This self-valved configuration is ideal for decentralized stations across large machines where running separate valve tubing and wiring is costly or impractical. The AC220V terminal entry provides a straightforward hardwired connection consuming 3.5 VA of power, with an IP65 rating and a fast 0.05 s activation time.
Because this unit features a 700mm stroke, ensure adequate side-load guidance to prevent premature seal wear and rod binding. The 5/2 valve routes air to drive the cylinder but does not lock or hold the load without live pressure; if you need true mechanical load holding, consider the SAIL lock variant. To replace this exact unit, match the 100mm bore, 700mm stroke, PT 3/8 valve port, AC220V voltage, terminal entry, PT thread, and standard carbon steel rod (no -S magnet).
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10A FAQ
The 100mm bore cylinder generates a push force of 3927 N at 0.5 MPa and 7068 N at 0.9 MPa. The integrated 4M310-10 valve has an effective area of 30.0 mm2 (Cv 1.68), providing ample flow for high-speed operation within the 30-800 mm/s speed range.
No separate remote valve is needed; the built-in 5/2 solenoid valve switches the cylinder directly from one AC220V coil signal. By factory default, the piston rod retracts when the coil is energised, but this can be reconfigured to extend-when-energised simply by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.