Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 700mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke700 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10B
The AirTAC SAIF100X700-10B is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve, delivering a Cv of 1.68 and a 30 mm2 effective orifice. Driven by a DC24V terminal coil consuming 3.0 W, it responds in 0.05 s and carries an IP65 rating. Because the integrated valve operates at 0.15-0.8 MPa, this defines the practical working pressure range for the assembled unit, even though the bare cylinder rates up to 1.0 MPa. At 0.9 MPa it generates 7068 N of push force.
This decentralized design eliminates the need for a separate remote valve, reducing panel space and tubing runs. The manifold connects the valve to the cylinder using O10 x O6.5 PU tubing, and the valve port (3/8") differs from the cylinder port (1/2"). By factory default, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised. The carbon steel rod and extruded aluminum barrel make it dimensionally interchangeable per ISO 15552.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×700 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10B Is Used
Decentralized Automation
Ideal for sprawling assembly lines where routing separate valve tubing is costly, letting each 100 mm station switch itself via a single DC24V signal.
High-Force Clamping
Delivers 7068 N of push force at 0.9 MPa for heavy-duty clamping and pressing tasks without needing an external valve manifold.
Retrofit Upgrades
Simplifies machine retrofits by integrating the 4M310-10 valve directly on the actuator, freeing up crowded control panels.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10B the Right Choice?
Choose this 100 mm bore when you need maximum thrust in the SAIF range; stepping down to an 80 mm bore drops the 0.5 MPa push force from 3927 N to 2513 N. A self-valved SAIF is ideal for large machines with decentralized stations, cutting wiring and plumbing costs versus running separate valve islands. For this 700 mm stroke, add a guide rail to prevent excessive side loads, as the air cushion only decelerates near stroke end and cannot hold a load without live pressure. If you need position holding, use a SAIL lock cylinder instead.
When ordering a replacement, verify the 100 mm bore, 700 mm stroke, 3/8" valve port, DC24V terminal coil, PT tapered threads, and standard carbon steel rod. Since no -S magnet is specified, it will not work with AirTAC CMSE reed or DMSE electronic sensors without modification.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10B FAQ
The 100 mm bore generates 7068 N of push force at 0.9 MPa. The built-in 4M310-10 5/2 valve has an effective area of 30 mm2 (Cv 1.68) and a maximum frequency of 4 cycles per second.
Yes, the factory setting retracts the rod when the DC24V coil is energised, but you can reposition the valve to extend-when-energised. The built-in valve eliminates the need for a separate remote valve, saving panel space and making it perfect for decentralized installations.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X700-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.