Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 75mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke75 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10A
The AirTAC SAIF100X75-10A is a double-acting ISO 15552 profile cylinder engineered with a built-in 4M310-10 5/2 solenoid valve, delivering a Cv of 1.68 via a 3/8" valve port. Driven by an AC220V terminal coil consuming 3.5 VA, it activates in 0.05 s. The integrated manifold uses PU tubing (O10 x O6.5) to bridge the valve and the 1/2" cylinder port, eliminating remote plumbing. Although the bare cylinder rates to 1.0 MPa, the practical operating range for this valved unit is 0.15-0.8 MPa.
Generating 3927 N of push force at 0.5 MPa (up to 801 kgf max), this 100mm bore actuator is designed for decentralized stations. Factory-set to retract the rod when the coil is energised, the valve can be repositioned to extend-when-energised. One coil signal drives the cylinder, saving panel space and tubing across large machines.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×75 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10A Is Used
Decentralized Assembly Lines
Eliminates the need for a remote valve island, allowing independent 100mm bore actuation across large-scale automated assembly machinery.
Heavy Material Handling
Provides 3927 N of push force at 0.5 MPa for moving substantial payloads directly at the workstation without external tubing runs.
Retrofit Automation
Simplifies machine upgrades by integrating a 4M310-10 valve and manifold directly on the cylinder, drastically reducing new pneumatic plumbing.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10A the Right Choice?
Select this 100mm bore model when an 80mm bore (delivering 2513 N push at 0.5 MPa) is insufficient for heavy positioning tasks. The self-valved SAIF100X75-10A excels over a separate cylinder and remote valve by consolidating control wiring and air plumbing directly at the actuator, which is ideal for space-tight machines. It uses a PT-threaded port with a standard carbon steel rod and no magnet; add an -S magnet if CMSE reed or DMSE electronic sensors are needed.
Because the built-in 5/2 valve routes air and holds position via pilot pressure, it does not function as a lock or brake. If the application requires dead-load holding without live pressure, consider the AirTAC SAIL lock or BSAI clamp-lock cylinder instead. This 75mm stroke operates safely within the 30-800 mm/s speed range.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10A FAQ
At 0.5 MPa operating pressure, the 100mm bore provides 3927 N of push force and 3681 N of pull force. It achieves a maximum force of 801 kgf at 1.0 MPa, though the integrated valve limits practical working pressure to 0.15-0.8 MPa.
Yes, the factory setting retracts the rod when the AC220V coil is energised, but the 5/2 valve can be repositioned on the manifold to extend-when-energised. This self-contained design requires no separate remote valve to function.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.