Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 75mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke75 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10B
The AirTAC SAIF100X75-10B is a double-acting ISO 15552 profile cylinder paired with a built-in 4M310-10 5/2 solenoid valve. This specific SKU features a DC24V terminal electrical entry drawing 3.0 W, a PT tapered port thread, and a standard carbon steel piston rod. The integrated valve provides a 30.0 mm2 effective area (Cv 1.68) and switches at up to 4 cycles per second. Because the manifold block connects to the cylinder via O10 x O6.5 PU tubing, the 1/2 inch cylinder port and 3/8 inch valve port remain distinct.
While the bare cylinder rates to 1.0 MPa, the operating pressure of the assembled SAIF unit is 0.15-0.8 MPa due to the internal pilot valve. In its factory setting, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised. This self-contained design eliminates remote plumbing, saving panel space for decentralized stations. The 100mm bore generates 3927N of push force at 0.5 MPa, making it a robust choice for heavy loads.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×75 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10B Is Used
Decentralized Assembly Lines
Eliminates the need for a remote valve island on large machines by integrating the 4M310 valve directly, reducing tubing complexity across multiple stations.
Heavy Material Handling
Leverages the 3927N push force at 0.5 MPa to move substantial payloads smoothly within a 30-800 mm/s speed range.
Space-Constrained Retrofits
Ideal for machinery upgrades where panel space is tight, using the built-in valve to minimize external wiring and pneumatic plumbing.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10B the Right Choice?
Select this 100mm bore model when your application demands high thrust that smaller neighbours cannot provide; stepping down to an 80mm bore drops the push force at 0.5 MPa to 2513N. The SAIF100X75-10B is optimal for decentralized machine layouts where running separate valve tubing is costly, as a single DC24V signal drives the actuator directly. If your system requires true load holding without live pressure, note that the 5/2 valve routes air but does not lock the piston; consider the SAIL series for pneumatic locking instead. Ensure your replacement matches the 75mm stroke, 3/8 inch valve port, DC24V voltage, terminal entry, and no magnet (-S).
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10B FAQ
At an operating pressure of 0.5 MPa, this 100mm bore cylinder delivers 3927N of push force and 3681N of pull force. The integrated 4M310-10 valve features a 30.0 mm2 effective area (Cv 1.68) to handle the required air volume.
Yes. The factory setting retracts the rod when the DC24V coil is energised, but you can reconfigure it to extend-when-energised by repositioning the valve. This self-switching design means no separate remote valve is needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X75-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.