Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 75mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke75 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10A
The AirTAC SAIF100X75S-10A is a double-acting ISO 15552 profile cylinder featuring a built-in 4M310-10 5/2 solenoid valve. This integrated manifold block uses a PU tube (O10 x O6.5) to connect the valve to the cylinder, eliminating remote plumbing. Driven by an AC220V terminal entry coil consuming 3.5 VA, it activates in 0.05 s. The valve operates at 0.15-0.8 MPa, setting the practical working range for the assembly despite the cylinder body rating of 1.0 MPa.
Delivering 3927 N of push force at 0.5 MPa, this 100 mm bore unit provides robust actuation. By default, the piston rod retracts when the coil is energised, but you can reconfigure the valve to extend-when-energised. The -S magnet supports CMSE reed and DMSE electronic sensors for precise position feedback.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×75 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10A Is Used
Decentralized Automation
Ideal for large factory layouts where running individual valve lines is costly, as the integrated 4M310 valve handles switching directly at the actuator.
High-Force Clamping
Provides 3927 N of push force at 0.5 MPa for heavy-duty clamping and holding tasks without needing external valving.
Space-Constrained Retrofit
Fits seamlessly into machine upgrades where panel space is full, bringing the 5/2 valve control directly onto the cylinder body.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10A the Right Choice?
Select this 100 mm bore model when your application requires high thrust, as stepping down to an 80 mm bore drops the 0.5 MPa push force to 2513 N. The self-valved SAIF design is optimal for decentralized machine stations, removing the need for a separate panel valve and long tubing runs. A single electrical signal drives the cylinder, saving panel space and wiring time.
This unit features a PT3/8 cylinder port and a 3/8 valve port. Note that the 5/2 valve routes air and does not lock the load; for position holding under zero pressure, consider the SAIL lock cylinder. When ordering a replacement, match the 100 mm bore, 75 mm stroke, 4M310-10 valve, AC220V terminal coil, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10A FAQ
The 100 mm bore generates 3927 N push and 3681 N pull force at 0.5 MPa. The built-in 4M310-10 valve has an effective area of 30.0 mm2 (Cv 1.68) with a max frequency of 4 cycles/sec.
The 5/2 valve is internal piloted and holds its last position via pilot pressure, not a spring. By factory default, energising the AC220V coil retracts the rod, but repositioning the valve changes it to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.