Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 75mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke75 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10B
The AirTAC SAIF100X75S-10B is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve, delivering a robust 3927N push force at 0.5 MPa. Driven by a DC24V terminal entry coil consuming just 3.0W, it achieves IP65 protection and responds in 0.05s. The integrated manifold uses O10xO6.5 PU tubing to bridge the valve and cylinder.
Because the cylinder body rates to 1.0 MPa but the internal pilot valve operates at 0.15-0.8 MPa, the practical working range for this assembled unit is 0.15-0.8 MPa. From the factory, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised. The -S magnet option supports CMSE reed and DMSE electronic sensors for precise position tracking.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×75 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10B Is Used
Decentralized Automation
Ideal for large machines needing decentralized control, switching directly from a DC24V signal without running long valve tubing back to a central panel.
High Force Clamping
Provides up to 3927N of push force at 0.5 MPa for heavy-duty clamping and pressing tasks within space-constrained assemblies.
Retrofit Positioning
Perfect for retrofits where adding a separate manifold is too costly, using the integrated 4M310-10 valve and CMSE/DMSE sensors for tracking.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10B the Right Choice?
Choose this self-valved SAIF unit when you need to eliminate remote valve plumbing and save panel space across decentralized machine stations. If 3927N of push force is excessive, stepping down to the 80mm bore yields 2513N at 0.5 MPa. For load-holding applications, note that the 5/2 valve routes air and does not lock the piston; consider the AirTAC SAIL lock cylinder instead. The air cushion only decelerates the rod near stroke end.
To replace this unit, match the 100mm bore, 75mm stroke, PT3/8 valve port, PT1/2 cylinder port, DC24V voltage, terminal entry, and the -S magnet. The carbon steel rod handles standard axial loads, but always verify guide bushings for your specific load dynamics.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10B FAQ
The built-in 4M310-10 valve has an effective area of 30.0 mm2 (Cv 1.68) and a max frequency of 4 cycles/sec. The 100mm bore cylinder generates 3927N push force and 3681N pull force at 0.5 MPa.
No separate valve is needed. By factory default, the rod retracts when the DC24V coil is energised, but the valve can be repositioned to extend-when-energised. The 5/2 valve holds its position via internal pilot pressure, not a spring.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X75S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.