Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-08B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-08B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 80mm stroke and a built-in 4M310-08 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke80 mm
- Built-in valve4M310-08
- Valve port1/4"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-08B
The AirTAC SAIF100X80-08B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-08 5/2 solenoid valve. This built-in valve provides an effective flow rate of 25.0 mm2 (Cv 1.40) and operates at a maximum frequency of 4 cycles per second. Equipped with a DC24V terminal entry coil consuming 3.0 W, it offers IP65 protection and a rapid 0.05 s response time. The carbon steel piston rod has an M20x1.5 thread, and the unit uses a PU tube (O10 x O6.5) to bridge the manifold and cylinder.
Because the cylinder body rates to 1.0 MPa but the internal pilot valve limits pressure, the practical working range for this assembled unit is 0.15-0.8 MPa. In its factory setting, the piston rod retracts when the coil is energised, but you can reconfigure it to extend-when-energised simply by repositioning the valve. Delivering up to 3927 N of push force at 0.5 MPa, it switches itself from one coil signal, eliminating remote valves and extra tubing for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-08B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-08B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-08 (5/2) |
|---|---|
| Valve flow | 25.0 mm² (Cv 1.40) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-08B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×80 | Bore × stroke in mm. |
| -08 | Valve port 1/4" → 4M310-08. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-08B Is Used
Decentralized Assembly Lines
Eliminates the need for a remote valve island on large machines by switching directly from a local DC24V signal, reducing plumbing complexity.
Heavy Material Handling
Leverages the 100mm bore's 3927 N push force at 0.5 MPa to move heavy jigs or fixtures without requiring an external solenoid bank.
Space-Constrained Machinery
Integrates the 4M310-08 valve directly onto the cylinder profile, saving valuable panel space and minimizing tubing runs in compact equipment.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-08B the Right Choice?
Choose this 100mm bore when you need maximum thrust in the SAIF range, such as moving heavy payloads where a 80mm bore (providing 2513 N push at 0.5 MPa) would be insufficient. The self-valved SAIF architecture is superior to a separate cylinder and remote valve when panel space is tight and running tubing across a large machine is costly. Select this specific DC24V terminal configuration for standard low-voltage control panels. Remember that the 5/2 valve routes air but does not lock the load mechanically; for position holding under zero pressure, consider the SAIL lock or BSAI clamp-lock series. Replacement parts must match the 100mm bore, 80mm stroke, PT1/4 valve port, DC24V voltage, terminal entry, PT thread, and no magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-08B FAQ
The 100mm bore generates a push force of 3927 N at 0.5 MPa and 5497 N at 0.7 MPa. The built-in 4M310-08 valve provides an effective area of 25.0 mm2 (Cv 1.40) with a maximum operating frequency of 4 cycles per second.
No, it features a built-in 4M310 5/2 solenoid valve driven by a DC24V terminal coil. By factory default, the rod retracts when the coil is energised, but this can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X80-08B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.