Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 80mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke80 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10A
The AirTAC SAIF100X80S-10A is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve, delivering a high flow rate with a 1.68 Cv and 30.0 mm2 orifice. It features a 100mm bore generating 3927N push force at 0.5 MPa, paired with an AC220V terminal coil consuming 3.5 VA. The integrated manifold uses O10 x O6.5 PU tubing to connect the valve to the cylinder, meaning the 3/8" valve port and 1/2" cylinder port are distinct connections that must not be confused.
Because the 5/2 valve operates from 0.15-0.8 MPa, the practical working range for this assembled SAIF unit is 0.15-0.8 MPa, even though the bare cylinder rates to 1.0 MPa. By default, the factory setting retracts the piston rod when the coil is energised, but you can reconfigure it to extend-when-energised simply by repositioning the valve. This self-switching design eliminates remote valves, reducing tubing and panel space for decentralized stations. The -S magnet supports CMSE reed and DMSE electronic sensors for precise position feedback.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×80 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10A Is Used
Decentralized Assembly Lines
Eliminates the need for a remote valve island, allowing independent 100mm bore actuation across large-scale automated machinery.
High-Force Clamping Stations
Delivers up to 3927N of push force at just 0.5 MPa, ideal for securing heavy components during machining or welding.
Retrofit Automation Upgrades
Simplifies machine upgrades by integrating the 4M310 valve and manifold directly on the cylinder, drastically reducing new pneumatic tubing runs.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10A the Right Choice?
Choose this 100mm bore SAIF when you need maximum push force (3927N at 0.5 MPa) in a space-constrained machine; stepping down to an 80mm bore drops the push force to 2513N. A self-valved SAIF100X80S-10A beats a separate cylinder plus remote valve when you want to minimize wiring and plumbing across decentralized stations, as one AC220V terminal coil signal drives the entire actuator. For replacements, verify the 100mm bore, 80mm stroke, 3/8" valve port, AC220V voltage, terminal entry, PT thread, and the -S magnet.
Since the stroke is under 300mm, side-load stress is minimal, but always ensure the load is guided to prevent binding. Note that the built-in 5/2 valve routes air and the cushions only decelerate near stroke end; neither function locks the load. If your application requires true load-holding, consider the AirTAC SAIL pneumatic lock or BSAI clamp-lock series instead.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10A FAQ
The 100mm bore generates a push force of 3927N and a pull force of 3681N at 0.5 MPa. The integrated 4M310-10 5/2 solenoid valve provides an effective flow area of 30.0 mm2 (Cv 1.68).
No, the integrated 4M310 valve controls the cylinder directly from a single AC220V terminal coil signal. By default, the rod retracts when energised, but it can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X80S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.