Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 900mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke900 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10A
The AirTAC SAIF100X900-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This built-in valve provides an effective flow rate of 30.0 mm2 (Cv 1.68) and operates at a maximum frequency of 4 cycles per second. Supplied with an AC220V coil utilizing a terminal electrical entry, it consumes 3.5 VA and achieves an IP65-rated response time of 0.05 seconds. While the cylinder body rates to 1.0 MPa, the practical operating range for this assembled unit is 0.15-0.8 MPa.
Generating up to 3927N of push force at 0.5 MPa, this 100mm bore unit is designed for decentralized installation across large machines. By using a manifold block and O10 x O6.5 PU tubing, it eliminates the need for separate remote valves and extensive plumbing. Factory set to retract the piston rod when the coil is energised, the valve can be repositioned to extend-when-energised if your sequence demands it.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 900 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×900 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10A Is Used
Decentralized Heavy Forming
Ideal for large machines needing localized heavy push force, eliminating long air lines back to a central valve manifold.
Automated Assembly Presses
Provides reliable 3927N thrust at 0.5 MPa for pressing operations, switching directly from a single AC220V coil signal.
Retrofit Material Handling
Perfect for upgrading existing lines where running new valve tubing is costly, offering self-contained actuation in tight spaces.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10A the Right Choice?
Choose this 100mm bore SAIF when an application requires heavy thrust that smaller neighbors cannot provide; for context, dropping to an 80mm bore reduces the 0.5 MPa push force to 2513N. The integrated 4M310-10 valve handles its own air routing via a 3/8" valve port, while the cylinder itself uses a PT 1/2" port. Because the 5/2 valve routes air rather than mechanically locking it, this cylinder cannot hold a load without live pressure—select a SAIL lock model if position holding is required.
When replacing this unit, match the 900mm stroke, 100mm bore, PT3/8 valve port, AC220V terminal coil, and standard carbon steel rod. Note that this cylinder lacks a magnet for sensors; adding an -S specification is required for CMSE reed or DMSE electronic switches. For a 900mm stroke, ensure adequate guide support to prevent excessive side-loading on the rod.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10A FAQ
The 100mm bore cylinder generates 3927N of push force at 0.5 MPa. The built-in 4M310-10 valve provides an effective area of 30.0 mm2 (Cv 1.68) to drive the piston at 30-800 mm/s.
The integrated 5/2 valve allows the cylinder to switch itself from one coil signal, saving panel space and plumbing. Factory set to retract-when-energised, it can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.