Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10B is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 900mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke900 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10B
The AirTAC SAIF100X900-10B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This specific assembly delivers a Cv of 1.68 with a 30mm effective orifice, driving a robust 3927N push force at 0.5 MPa. It is equipped with a DC24V terminal coil consuming 3.0W, IP65 protection, and a 0.05s activation time. Because the valve manifold operates at 0.15-0.8 MPa, this defines the practical working pressure range for the unit, even though the bare cylinder body rates to 1.0 MPa. The manifold bridges the PT1/2 cylinder port to the PT3/8 valve port using O10xO6.5 PU tubing.
By integrating the valve directly onto the cylinder body, this unit eliminates the need for a remote valve station, saving significant panel space and plumbing. It is designed for decentralized installation across large machines, requiring only a single electrical signal to drive the actuator. The factory setting retracts the piston rod when the coil is energised, but this can be reconfigured to extend-when-energised simply by repositioning the valve. The carbon steel piston rod and aluminum extruded barrel provide durable, no-lubrication operation.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 900 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×900 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10B Is Used
Large Machine Decentralized Stations
Eliminates long air lines by mounting the 4M310-10 valve directly on the cylinder, perfect for distributed actuation points across a sprawling assembly line.
Heavy Material Handling
Provides 3927N of push force at 0.5 MPa for lifting or shifting heavy pallets and fixtures, with integrated air cushioning to decelerate loads smoothly.
Space-Constrained Retrofits
Ideal for upgrading older machinery where adding a remote valve manifold is impossible, using the built-in DC24V terminal coil for direct electrical control.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10B the Right Choice?
Choose this 100mm bore when substantial thrust is required, delivering 3927N push and 3681N pull force at 0.5 MPa. If your application requires less force, stepping down to an 80mm bore provides 2513N push force, which may improve cycle times and reduce air consumption. The integrated 4M310-10 valve offers a high flow rate (Cv 1.68) and a max frequency of 4 cycles per second, making it ideal for self-switching duties where running separate valve tubing is costly or impractical. The DC24V terminal connection offers safe, low-voltage control with solid-state switching reliability.
When selecting this model, note that the 5/2 valve routes air but does not lock the load; if unpowered position holding is required, consider the SAIL lock or BSAI clamp-lock series. For replacements, verify the 900mm stroke, PT3/8 valve port, PT1/2 cylinder port, DC24V voltage, terminal entry, and standard carbon steel rod. Because the stroke is 900mm, always use a guide mechanism to prevent excessive side-loading on the piston rod and ensure rigid mounting to absorb the kinetic energy at stroke ends.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10B FAQ
The 100mm bore generates 3927N push and 3681N pull force at 0.5 MPa, reaching 5497N push at 0.7 MPa. The built-in 4M310-10 valve provides an effective area of 30mm2 (Cv 1.68) with a maximum frequency of 4 cycles per second.
No, the built-in 5/2 solenoid valve routes air but does not lock the load without live pressure. By default, the rod retracts when the coil is energised, but it can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X900-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.