Airtac SAIF Series Standard Cylinder with Valve SAIF100X900S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF100X900S-10A is a genuine double-acting ISO 15552 cylinder with a Ø100mm bore, 900mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke900 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF100X900S-10A
The AirTAC SAIF100X900S-10A is a double-acting ISO 15552 profile cylinder paired with a built-in 4M310-10 5/2 solenoid valve. Delivering a 30.0 mm2 orifice (Cv 1.68) and a robust 3927N push force at 0.5 MPa, it bundles actuation and control into one unit. This specific configuration features an AC220V terminal coil consuming 3.5 VA, PT tapered threading, and a carbon steel piston rod. Because the integrated valve operates at 0.15-0.8 MPa, this defines the practical working pressure for the assembled unit, even though the bare cylinder rates to 1.0 MPa.
A pre-installed magnet (-S) enables position detection with CMSE reed or DMSE electronic sensors. By routing air internally via a PU tube (O10 x O6.5), the manifold eliminates remote plumbing. The factory setting retracts the rod when the coil is energised, but you can reposition the valve to extend-when-energised. One coil signal drives the entire station, making it exceptionally space-efficient for decentralized installations across large machinery.
Airtac SAIF Series Standard Cylinder with Valve SAIF100X900S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF100X900S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 900 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/2 |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF100X900S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 100×900 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF100X900S-10A Is Used
Large Machine Decentralization
Ideal for sprawling assembly lines where running individual valve lines is costly, this self-switching cylinder operates independently from a single AC220V signal.
Heavy Pressing Operations
Delivering 3927N of push force at just 0.5 MPa, it handles substantial clamping and pressing tasks without needing a remote high-flow valve bank.
Retrofit Automation
Perfect for upgrading existing machinery where adding a separate pneumatic control panel is physically constrained, thanks to its integrated 4M310-10 manifold.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF100X900S-10A the Right Choice?
Choose this 100mm bore when you need maximum thrust in the SAIF range; stepping down to an 80mm bore drops the 0.5 MPa push force to 2513N. This 900mm stroke is well within the 1500mm standard limit, but at this length you must account for side loads and use a guide to prevent rod deflection. The 4M310 valve maxes at 4 cycles per second, matching high-flow demands. A self-valved SAIF beats a separate cylinder plus remote valve by cutting panel space, tubing runs, and wiring complexity. For load-holding, note that the 5/2 valve routes air but does not lock; specify a SAIL pneumatic lock or BSAI clamp-lock instead. To replace this unit, match the 100mm bore, 900mm stroke, PT3/8 cylinder port, 3/8 valve port, AC220V terminal coil, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF100X900S-10A FAQ
The 100mm bore generates 3927N push and 3681N pull force at 0.5 MPa. The built-in 4M310-10 valve provides a 30.0 mm2 effective area (Cv 1.68) with a maximum frequency of 4 cycles per second.
The integrated 5/2 valve eliminates the need for a separate remote valve, saving panel space and tubing for decentralized stations. Factory-set to retract when the AC220V coil is energised, it can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF100X900S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.