Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-08C
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-08C is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 150mm stroke and a built-in 4M210-08 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke150 mm
- Built-in valve4M210-08
- Valve port1/4"
- CoilAC110V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-08C
The AirTAC SAIF32X150S-08C is a double-acting ISO 15552 profile cylinder that integrates a 4M210-08 5/2 solenoid valve directly onto its body. Equipped with a magnet for position sensing, it works seamlessly with AirTAC CMSE reed and DMSE electronic switches. Driven by an AC110V terminal entry coil drawing 3.5 VA, the integrated valve provides a Cv of 0.89 and operates at a maximum frequency of 5 cycles per second. Because the cylinder body rates to 1.0 MPa but the built-in valve operates at 0.15-0.8 MPa, the practical working range for this assembled unit is 0.15-0.8 MPa.
By default, the factory setting retracts the piston rod when the coil is energized, but this can be reconfigured to extend-when-energized simply by repositioning the valve. The manifold block connects to the 32mm bore using O8xO5 PU tubing, feeding a cylinder that delivers 345N of pull force at 0.5 MPa. This decentralized design eliminates the need for a separate remote valve, drastically reducing plumbing and panel space across large machines.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-08C Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-08C |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-08 (5/2) |
|---|---|
| Valve flow | 16.0 mm² (Cv 0.89) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC110V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-08C
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×150 | Bore × stroke in mm. |
| -08 | Valve port 1/4" → 4M210-08. |
| C | Coil voltage AC110V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-08C Is Used
Decentralized Stations
Ideal for large machines with multiple actuators, eliminating long air lines by switching locally via the AC110V terminal signal.
Compact Assembly
Fits into tight machinery spaces where a separate valve and manifold would add unwanted envelope bulk to the 32mm profile.
Retrofit Upgrades
Perfect for upgrading existing setups where adding new pneumatic tubing is difficult, requiring only a single electrical connection.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-08C the Right Choice?
Choose this 32mm bore if your application requires around 345N pull force at 0.5 MPa; stepping down is not an option as 32mm is the minimum, but stepping up to a 40mm bore yields 528N pull if your load demands more. The SAIF32X150S-08C excels in decentralized stations where running pneumatic tubing from a distant valve island is costly or space-prohibitive. It includes a -S magnet for CMSE/DMSE sensors, a PT1/4 valve port, and a PT1/8 cylinder port. When ordering a replacement, verify the 150mm stroke, AC110V voltage, terminal entry, and PT thread type. Because the stroke is 150mm, ensure adequate guiding to prevent side-loading issues. Note that the 5/2 valve routes air but does not lock the load; for position holding, consider the SAIL lock variant.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-08C FAQ
At 0.5 MPa, the 32mm bore provides 402N push and 345N pull force. The integrated 4M210-08 valve has an effective area of 16.0 mm2 (Cv 0.89).
No, the built-in 4M210 5/2 valve switches the cylinder directly from one coil signal. By default, the rod retracts when energized, but it can be reconfigured to extend by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-08C
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.