Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06A is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 160mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke160 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06A
The AirTAC SAIF32X160S-06A is a double-acting ISO 15552 profile cylinder featuring a built-in 4M210-06 5/2 solenoid valve. This integrated valve delivers a 14.0 mm2 effective area (Cv 0.78) and operates at 5 cycles/sec. Supplied with an AC220V terminal connection coil drawing 3.5 VA, it activates in 0.05 s. Because the valve manifold uses an O8 x O5 PU tube, the 1/8" cylinder port and 1/8" valve port are kept distinct. A carbon steel rod and -S magnet for CMSE reed or DMSE electronic sensors are standard.
While the bare cylinder rates to 1.0 MPa, the internal piloted 5/2 valve limits the practical SAIF working pressure to 0.15-0.8 MPa. Generating 402 N of push force at 0.5 MPa, it switches itself from one coil signal, eliminating remote plumbing. By default, the rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×160 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06A Is Used
Decentralized Stations
Ideal for large machines with distributed stations, driving the 32mm bore directly from its built-in valve without running long control lines back to a central panel.
Compact Assembly
Fits tight machinery envelopes where space is premium, bundling the actuator and 4M210 valve into one ISO 15552 interchangeable profile unit.
Retrofit Automation
Simplifies upgrades where adding external valve islands is costly, providing a single AC220V terminal connection for direct cylinder control.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06A the Right Choice?
Choose this 32mm bore if you need decentralized actuation delivering 402 N push at 0.5 MPa; step up to a 40mm bore (628 N push) if your load demands more force. A self-valved SAIF beats a separate cylinder plus remote valve by saving panel space and tubing across large machines. For load-holding, note the 5/2 valve routes air but is not a lock; consider SAIL for pneumatic locking. When ordering replacements, match the 160mm stroke, 1/8" PT port, AC220V terminal coil, and -S magnet. As the stroke is 160mm, ensure adequate guiding to prevent excessive side-loading on the rod.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06A FAQ
The 32mm bore generates 402 N push and 345 N pull force at 0.5 MPa. The built-in 4M210-06 valve has a 14.0 mm2 orifice with a Cv of 0.78.
Yes. The factory setting retracts the rod when the AC220V coil is energised, but you can reposition the 5/2 valve on the manifold to extend-when-energised. No separate remote valve is needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.