Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06B is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 160mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke160 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06B
The AirTAC SAIF32X160S-06B is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve, delivering a 14.0 mm2 flow area (Cv 0.78). Equipped with a DC24V terminal coil drawing 3.0 W, it integrates pneumatic control directly on the actuator. The base cylinder rates to 1.0 MPa, but the integrated valve limits the practical SAIF operating range to 0.15-0.8 MPa.
Providing 402N push force at 0.5 MPa, this 32mm bore unit includes a magnet for CMSE reed and DMSE electronic sensors. The manifold uses O8xO5 PU tubing to bridge the cylinder and valve. By default, the rod retracts when the coil is energised, but you can reposition the valve to extend on signal, eliminating the need for a remote valve bank.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×160 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06B Is Used
Decentralized Automation Stations
Ideal for large machines with distributed stations, eliminating long tubing runs by mounting the 5/2 valve directly on the cylinder.
Space-Constrained Machinery
Saves valuable panel space by integrating pneumatic control onto the actuator, perfect for compact equipment layouts.
Sensor-Equipped Positioning
The -S magnet enables precise end-of-stroke detection with CMSE or DMSE switches for accurate movement tracking.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06B the Right Choice?
Choose this self-valved SAIF32X160S-06B when decentralizing control across large machines, as it saves panel space and cuts tubing runs compared to a separate cylinder and remote valve. If your application requires greater thrust, stepping up to the 40mm bore yields 628N push force at 0.5 MPa. Conversely, if you need less flow, note this 06 port provides 14.0 mm2 effective area. The 160mm stroke exceeds 300mm? No, but for any stroke over 300mm, ensure proper guide support to handle side loads.
For load-holding tasks, remember the 5/2 valve routes air but does not lock the piston; consider SAIL or BSAI series for true clamping. To replace this unit, match the 32mm bore, 160mm stroke, PT1/8 cylinder port, 06 valve port, DC24V voltage, PT thread, terminal entry, and the -S magnet option.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06B FAQ
At 0.5 MPa, this 32mm bore cylinder provides 402N push and 345N pull force. The built-in 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and a maximum frequency of 5 cycles per second.
It features a 4M210 5/2 solenoid valve that switches the cylinder directly from one coil signal, requiring no separate remote valve. This specific model uses a DC24V terminal coil (3.0 W, IP65). By factory default, the rod retracts when energised, but it can be reconfigured to extend when energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.