Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06C
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06C is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 160mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke160 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC110V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06C
The AirTAC SAIF32X160S-06C is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M210-06 5/2 solenoid valve, delivering a Cv of 0.78 and a 14.0 mm2 effective orifice. It is supplied with an AC110V terminal-style coil drawing 3.5 VA, features IP65 protection, and responds in 0.05 s or less. The integrated manifold uses an O8 x O5 PU tube to bridge the valve and cylinder, meaning the 1/8" valve port and 1/8" cylinder port are kept distinct. Because the valve operates at 0.15-0.8 MPa, the practical working pressure for this assembled SAIF unit is capped at 0.8 MPa despite the cylinder body rating to 1.0 MPa.
This 32 mm bore version generates 402 N of push force at 0.5 MPa and includes a magnet for position sensing with CMSE reed and DMSE electronic switches. By default, the piston rod retracts when the coil is energised, but this can be reconfigured to extend-when-energised simply by repositioning the valve. It eliminates the need for a separate remote valve, saving panel space and tubing for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06C Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06C |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC110V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06C
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×160 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| C | Coil voltage AC110V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06C Is Used
Decentralized Stations
Ideal for large machines with multiple stations, eliminating long tubing runs from a central manifold by switching directly from a single AC110V signal.
Compact Assembly
Fits into tight machine envelopes where panel space is restricted, using the built-in 4M210 valve and manifold to control the 402 N force locally.
Retrofit Upgrades
Perfect for upgrading existing ISO 15552 lines, adding self-switching capability without redesigning the pneumatic panel layout.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06C the Right Choice?
Choose this self-valved SAIF unit over a plain SAI cylinder with remote plumbing when you need to minimize wiring and tubing across a large machine. The integrated 4M210 valve handles the 32 mm bore perfectly, but if your application requires higher force, stepping up to the 40 mm bore yields 628 N of push force at 0.5 MPa. Remember that the built-in 5/2 valve routes air but does not lock the load; for true position holding, consider the SAIL lock or BSAI clamp-lock series. This 160 mm stroke is under the 1000 mm standard maximum, so no non-standard surcharge applies. Because stroke is below 300 mm, side-load concerns are minimal, but always ensure axial load alignment to prevent premature seal wear.
When ordering a replacement, verify the 32 mm bore, 160 mm stroke, 1/8" valve port (code 06), AC110V terminal coil, PT tapered thread, and the -S magnet option for CMSE / DMSE sensor compatibility.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06C FAQ
The 32 mm bore generates 402 N of push force and 345 N of pull force at 0.5 MPa. The built-in 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and a maximum frequency of 5 cycles per second.
The integrated 5/2 valve is internal pilot operated and holds its position via pilot pressure, not a spring. By default, the rod retracts when the AC110V coil is energised, but it can be reconfigured to extend-when-energised. It routes air to switch the cylinder but does not lock or hold the load without live pressure.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-06C
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.