Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-08C
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-08C is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 160mm stroke and a built-in 4M210-08 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke160 mm
- Built-in valve4M210-08
- Valve port1/4"
- CoilAC110V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-08C
The AirTAC SAIF32X160S-08C is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M210-08 5/2 solenoid valve, delivering a Cv of 0.89 and a 16.0 mm2 effective area. Driven by an AC110V terminal entry coil drawing 3.5 VA, it switches itself from one electrical signal. While the bare cylinder rates to 1.0 MPa, the integrated valve limits the practical SAIF operating pressure to 0.15-0.8 MPa. In this 32mm bore configuration, it generates 402N of push force at 0.5 MPa and includes a magnet for CMSE reed and DMSE electronic sensors.
By integrating the valve directly on a manifold block using O8xO5 PU tubing, this unit eliminates remote plumbing and saves panel space, making it perfect for decentralized machine stations. The factory setting retracts the piston rod when the coil is energised, but you can reposition the valve to extend-when-energised if needed. The cylinder features a 1/8 port, while the valve utilizes a 1/4 port, and both share a PT tapered thread type.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-08C Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-08C |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-08 (5/2) |
|---|---|
| Valve flow | 16.0 mm² (Cv 0.89) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC110V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-08C
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×160 | Bore × stroke in mm. |
| -08 | Valve port 1/4" → 4M210-08. |
| C | Coil voltage AC110V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-08C Is Used
Decentralized Stations
Ideal for large machines with multiple nodes, eliminating long air lines by switching locally via the AC110V coil signal.
Compact Assembly
Fits into tight spaces where mounting a separate 4M210 valve and manifold is impossible, saving valuable panel real estate.
Wiring Retrofits
Perfect for upgrading older machines where running new pneumatic tubing is difficult, requiring only a single electrical connection.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-08C the Right Choice?
Choose this 32mm bore SAIF when you need 402N push force at 0.5 MPa and want to avoid the tubing and wiring complexity of a separate cylinder and remote valve. If your application requires less force, stepping down is not an option as 32mm is the smallest available SAIF bore; if you need more power, stepping up to the 40mm bore yields 628N of push force at 0.5 MPa. This self-valved design excels in space-tight machines and retrofits where running air tubing is costly. Remember that the 5/2 valve routes air but does not lock the load mechanically; for position holding, consider the SAIL lock variant.
This specific SKU pairs a 1/4 valve port with an AC110V terminal entry coil. It includes the -S magnet for position sensing. When ordering a replacement, confirm the 160mm stroke, 1/8 cylinder port, PT thread, and AC110V voltage. Since the stroke is 160mm, ensure adequate guiding to prevent side-load wear on the rod.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-08C FAQ
The 32mm bore generates 402N of push force and 345N of pull force at 0.5 MPa. The built-in 4M210-08 valve provides a 16.0 mm2 effective area (Cv 0.89) with a maximum frequency of 5 cycles per second.
No, the SAIF32X160S-08C has a built-in 4M210 5/2 valve that controls the cylinder directly from the AC110V coil signal. By factory default, the rod retracts when energised, but it can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X160S-08C
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.