Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06B is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 175mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke175 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06B
The AirTAC SAIF32X175-06B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M210-06 5/2 solenoid valve. This specific configuration pairs a 1/8" valve port with a DC24V terminal coil, delivering a 14.0 mm2 effective area (Cv 0.78) and drawing 3.0 W power. The manifold connects to the cylinder via an O8 x O5 PU tube, operating at a 5 cycle/sec maximum frequency. Because the valve limits the assembly, the practical working pressure is 0.15-0.8 MPa, even though the bare cylinder rates to 1.0 MPa.
Providing 402 N of push force at 0.5 MPa, this 32mm bore unit switches itself from a single coil signal, eliminating remote plumbing and saving panel space for decentralized stations. The factory setting retracts the piston rod when the coil is energised, but you can reposition the valve to extend-when-energised. It features adjustable air cushions at both ends to decelerate motion near stroke limits, though it does not hold loads without live pressure.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×175 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06B Is Used
Decentralized Stations
Ideal for large machines with decentralized stations, switching directly from a DC24V signal to eliminate remote valve panels and complex tubing runs.
Compact Assembly Lines
Delivers 402 N push force at 0.5 MPa in tight envelopes, perfect for space-constrained assembly lines where panel space is at a premium.
Retrofit Automation
Suits retrofit projects where adding a separate valve manifold is costly, using the built-in 4M210-06 valve and O8 x O5 PU tubing for local control.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06B the Right Choice?
Select this 32mm bore model when your application requires a compact, self-valved actuator delivering around 402 N of push force at 0.5 MPa. If your machine needs greater thrust, stepping up to the 40mm bore yields 628 N of push force at the same pressure. The SAIF32X175-06B is ideal for decentralized installations where running separate valve tubing is costly, as the integrated 4M210-06 valve handles switching directly on the cylinder. The 175mm stroke falls within standard limits, so no non-standard surcharge applies.
When ordering a replacement, verify the 32mm bore, 175mm stroke, 06 (1/8") valve port, DC24V voltage, and terminal electrical entry. Note that the cylinder port is PT1/8. Since the 5/2 valve routes air and the cushions only decelerate the piston, this unit cannot hold a load unpowered; for positive locking, consider the SAIL series. This base cylinder accepts CMSE reed and DMSE electronic sensors if a magnet is specified.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06B FAQ
The 32mm bore generates 402 N of push force and 345 N of pull force at 0.5 MPa. The integrated 4M210-06 valve has a 14.0 mm2 orifice (Cv 0.78) and operates at a maximum frequency of 5 cycles per second.
The 5/2 valve routes air but does not hold the load without live pressure. By default, the factory setting retracts the rod when the DC24V coil is energised, but you can reposition the valve to extend-when-energised. No separate remote valve is needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.